Help with Z and P using Kessil 350W

[Justbecause]

I have a 55G long 48X15X15. Only trying to light up 36X15X15 area. I have 2 Kessil 350W. Most of the corals I am concerned about are Acan, Zoas and Palys. Z and P are mostly located 1"-5" from the sand bed. Acans are mostly on the sand bed. My question is % on blues and whites? Time period they are on for? How high from the water? Thank you.

 

[650-IS350]

on my 37 Cube, I have 100 blue and about 5% white as am acclimating some new frags, but when back to 100% current set up its 100% blue and about 30-40% white.. I hate white out look and the all blue look so I go for the cool white look..

 

[Justbecause]

on my 37 Cube, I have 100 blue and about 5% white as am acclimating some new frags, but when back to 100% current set up its 100% blue and about 30-40% white.. I hate white out look and the all blue look so I go for the cool white look..

Time period they are on?

 

[650-IS350]

4pm tp 11pm then moon light for 220 mins after lights turn off. ( separate LED )

 

[Ckyuv]

Just took down my 55 but I had 3 of the Kessil a350w on it at 100% from 10am to 8pm. Lights were on a light bar and were 7" off the surface of the water