Helpppp Control 2 x 6055 ???

[honda1733]

Hi... I neeeeed your help

I want control 2 x 6055 Tunze pump.. I bought the Tunze Cable.. connected the 2 controllers... and after..... i can't configure my pump.

My second Turbelle pump is positioned on the opposite side of the aquarium, the inverse operation must be activated on the controller. But it doesn't work..

My first pump work : around 30 % to 100 %
The second one : always same speed.....

Sorry for my english , i speak french.

thanks

 

[rvitko]

Is the second one in external mode? If so I assume a bad cable or one controller has a bad connection for the cable.

 

[honda1733]

Ok i think i can't do this :

Example:

Pump 1 = around 30% pulse 5 sec. - 100% pulse 5 sec
Pump 2 = around 100% pulse 5 sec. - 30% pulse 5 sec

???

I can :

Pump 1 = 100% pulse 5 sec - Off
Pump 2 = off 5 sec - 100% pulse

 

[rvitko]

It sounds like the bottom pulse speed knob is turned to off, turn this to 30% and use pulse mode and you should get the setting you want. Main speed 100%, pulse to 5 seconds (middle) Pulse speed 30%. Have pump 1 in pulse mode, pump 2 in inverse external control.