How many people here

coral_lagoon

Pushrod Powered
Just mix their salt and use the water after 2 to 3 hours?

Ive been doing this I wanted to see how many people here do the same thing. Thanks... :beer:
 
I've done it with no apparent ill effects, but now I just let it mix overnight, it's easier for me when it's split between two days.
 
hah i guess im bad to, as soon as all my salt is dissolved and my salt reads a constant 1.025 and temperature is 78 it flushes into the tank.
 
I think the only detriment to adding freshly mixed water is the Ph level. It'll stabilize around the manufacturer's specs after that time. Honestly though, I can't imagine 5 gal. in a, say, 60 gal. system will have that much of an impact on the Ph levels.
 
<a href=showthread.php?s=&postid=15394094#post15394094 target=_blank>Originally posted</a> by sikpupy
I use mine right away as long as the salt has disolved, it is clear and up to temps.

I agree. We mix up 100 gallons at a time and do 60g in my roommates 450g system, and 40g in my 250g system as soon as it's totally disolved, clear and close to the right temp. In systems our size a couple degrees centigrade changes our temp maybe one degree at most. Never seen an issue and we've been doing it like this since the beginning. We only wait 24 hours if the water takes that long to warm up.
 
<a href=showthread.php?s=&postid=15394407#post15394407 target=_blank>Originally posted</a> by cfarrow2
I think the only detriment to adding freshly mixed water is the Ph level. It'll stabilize around the manufacturer's specs after that time. Honestly though, I can't imagine 5 gal. in a, say, 60 gal. system will have that much of an impact on the Ph levels.

I've tested the pH and never seen it too low or high to use immediately though. Even if it was, you're right, doing a 10-20% water change shouldn't change your pH enough to make an impact.
 
I've done the mix and pour in the past, and not had anything bad happen. I like to do mine a day or so in advance now and add some of my supps that I am dosing to it before using it to do the wc.
 
If I'm not mistaken, I think that one of the main reasons we wait at least 24 hours, is because if you make RO-DI water, it is depleted of oxygen. When you put a pump in the mixture, it oxygenates the water as well making sure you don't dump any undissolved salt on a sensitive coral.
 
<a href=showthread.php?s=&postid=15395702#post15395702 target=_blank>Originally posted</a> by briangg57
If I'm not mistaken, I think that one of the main reasons we wait at least 24 hours, is because if you make RO-DI water, it is depleted of oxygen. When you put a pump in the mixture, it oxygenates the water as well making sure you don't dump any undissolved salt on a sensitive coral.

Agreed, the biggest reason to wait is to ensure good aeration of the water before it goes into the system.

I overkill and have a 35g can that stays in the garage that I keep pre mixed. I use it when I do water changes and immediately fill it back up and add salt. I do water changes every 10 days so the water is sitting in the can with a maxijet running 24 7 for over a week. I've done the mix and dump before, but find its easier for me to just set it up ahead of time and have it ready to go when I need it. (also very convenient in case of an emergency).
 
+1
I do however do small WC's, about 15% each time.

<a href=showthread.php?s=&postid=15394094#post15394094 target=_blank>Originally posted</a> by sikpupy
I use mine right away as long as the salt has disolved, it is clear and up to temps.
 
<a href=showthread.php?s=&postid=15393948#post15393948 target=_blank>Originally posted</a> by GrimReefer82
I am bad then! I use mine after about 15 minutes and always have with no ill effects.

Me too...for several years. No problem.
 
Back
Top