How to wall mount a 7095 controller

[will_w]

I have installed (2) 6000s and a 7095 controller. Here is a picture of the 7095 installed.

I used the included wall mount with the clip. I attached the clip to the 7095 using the double sided sticky pad. The problem is that the 7095 keeps falling down. It seems like the sticky pad isn't sticky enough. What should I do to make it stay on the board? I keep finding it sitting down next to the sump.

 

[rvitko]

I would get another piece of double sided tape. I haven't had this problem the double sided tape really is tough stuff. Try cleaning the back of the controller with rubbing alcohol and just use a piece of double sided tape from the hardware store (similar thick foam type tape)

 

[will_w]

I'll give that a shot. By the way it's not coming off of the controller its coming off of the clip, but I think the same suggestion applies. Thanks

 

[Maximus]

I would try some industrial strength velcro from Home Depot. It works like a charm!