winereef
New member
this is how I put my 100 gallon tank in the wall.
before putting it in the wall
I chose a to put it in the wall in my living room with the back side of the tank would be hidden inside a closet.
after measuring the living-room and finding the exact middle spot i made a paper cut out of the tank and taped up on the wall. I glad i did that because I found out that the normal hight of the tank would have been way to low and would have looked very bad in that room. (so I eventually raised the tank aprox. 1 foot using wood "I-beams")
We all know what the inside of a closet looks like so, This is the closet with some work in progress. stage 1: cutting the sheetrock and the studs.
I also at this point put in 1 "I-Beam" so I could make my measurments and also put in a "rail" over the cut studs.
Sure enough, I ran into a hot wire, so I re-routed that around the tank and made a couple extra outlets inside the closet.
before putting it in the wall

I chose a to put it in the wall in my living room with the back side of the tank would be hidden inside a closet.
after measuring the living-room and finding the exact middle spot i made a paper cut out of the tank and taped up on the wall. I glad i did that because I found out that the normal hight of the tank would have been way to low and would have looked very bad in that room. (so I eventually raised the tank aprox. 1 foot using wood "I-beams")
We all know what the inside of a closet looks like so, This is the closet with some work in progress. stage 1: cutting the sheetrock and the studs.

I also at this point put in 1 "I-Beam" so I could make my measurments and also put in a "rail" over the cut studs.

Sure enough, I ran into a hot wire, so I re-routed that around the tank and made a couple extra outlets inside the closet.