iPhone apex app

[Crackem]

Was something changed or done to this app today? I can't get into any of my advanced programming and when I try to enter programming for my heater and chiller I'm getting error messages. If temp > 81 then on is giving me an error now and never did before.

\\ Error: Valid keywords following If are Temp, pH, ORP, DO, Cond, Feed Cycle, SwitchX, PowerFail, Sun, or Moon //Error: line 3 - If temp > 81 then on

 

[L8ndeb]

//Error: line 3 - If temp > 81 then on

I don't know if this is relevant, but try capitalizing T in temp, T in Then and changing on to ON.

 

[Crackem]

I can't change programming using app anymore. I thought I fixed it by rebooting phone but I can't access programming by going to control and selecting an outlet
I fixed the programming issue tho I set up pm2 with temp probe in it so I needed to put if tempx5.

 

[Crackem]

I'm able to change my outlet programming without using wifi, but if I try with wifi on I can't change outlet programming.

 

[Crackem]

Anyone have this happen to them while using iPhone app or am I the only one. Hopefully the jpg will upload below.

 

[Crackem]

This image is what I am used to seeing

 

[Crackem]

I deleted app and reinstalled and its working! Can't understand why it happened but I guess I should've tried that earlier.

 

[swearint]

Anyone have this happen to them while using iPhone app or am I the only one. Hopefully the jpg will upload below.

I can't recall if that has happened with the app, but I have seen it using IE. A screen refresh would fix the issue.

Todd

 

[bazineta]

That's just an incomplete transfer from the Apex, typically caused by a flaky network connection. Refreshing (the refresh button, in the upper right), will fix it.

So will reinstalling the app, of course, but hitting the button seems like an easier course of action.

 

[Crackem]

That's just an incomplete transfer from the Apex, typically caused by a flaky network connection. Refreshing (the refresh button, in the upper right), will fix it.

So will reinstalling the app, of course, but hitting the button seems like an easier course of action.

Ok great now I know what to do if it happens again.
I get a lot of apex has timed out messages because of my flaky connection but its the best I can do with what I have. I'm not using a gaming adapter because I have the Ethernet cable running about 20 feet from a bedroom to the apex.

 

[Ripperj]

I had the same issue as you show in post #5 on my iPad, when I went and tried again it was normal.

 

[Crackem]

It happened again so i deleted app and reinstalled and this time it won't let me add a second apex so I can access it using 3G. I'm putting in my apex IP and port 8080 and the app just crashes.

 

[Crackem]

Got it working. This time I had it search for apex first and it set up than I added my public IP address so I can use it with wifi.

 

[Crackem]

Thought I had it working but I spoke to soon. I can use the app with wifi but I can't connect on 3G. It either crashes or I get the image that I posted.