BubbleMyTip
New member
I think you meant 30 = once every 30 days.
The difference between 0 and 1 is that 0 means every day starting today (the day you're setting the pump). 1 is every day starting from tomorrow.
Jebao Dosing pump thread.
- Thread starter evolutionZ
- Start date
I think you meant 30 = once every 30 days.
The difference between 0 and 1 is that 0 means every day starting today (the day you're setting the pump). 1 is every day starting from tomorrow.
mannyhernz
Member
0 means skip 0 days.
1 means skip 1 day.
2 means skip 2 days.
Etc....
Sent from my LGLS990 using Tapatalk
with jecod box it's almost assuredly a v2.
steallife904
New member
ya that has to be version 2.
jbvdhp
Active member
Jebao Dosing pump thread.
Thanks guys. I'm glad there's a cheap doser, but in also worried that there's a cheap doser. I have way too much livestock to lose that Im considering taking the plunge for a Ca reactor, which doesn't seem cheaper to run year to year.
Baked Baking soda and a 50# tub of CaCl from my pool supply place seem to last forever.
Sent using your IP address
Thanks guys. I'm glad there's a cheap doser, but in also worried that there's a cheap doser. I have way too much livestock to lose that Im considering taking the plunge for a Ca reactor, which doesn't seem cheaper to run year to year.
Baked Baking soda and a 50# tub of CaCl from my pool supply place seem to last forever.
Sent using your IP address
jefferzbooboo
New member
I have a programming question.
I want to dose the same product but on different amounts on different days.
I want to dose 15 ml on a Monday and 3ml on the rest of the days.
Could I set one pump for
P# time per day:
For: 1
Interval day:
For: 7
Dosing level:
12ml
Another pump have
P# time per day:
For: 1
Interval day:
For: 0
Dosing level:
3ml
Also, would it be okay to T off my line from my dosing container to feed the 2 pumps as long as I used check valves?
I want to dose the same product but on different amounts on different days.
I want to dose 15 ml on a Monday and 3ml on the rest of the days.
Could I set one pump for
P# time per day:
For: 1
Interval day:
For: 7
Dosing level:
12ml
Another pump have
P# time per day:
For: 1
Interval day:
For: 0
Dosing level:
3ml
Also, would it be okay to T off my line from my dosing container to feed the 2 pumps as long as I used check valves?
Last edited:
jefferzbooboo
New member
jemw
New member
Thanks Jeff. I went to their web site initially, but they don't have a link for the dosing pumps. Nice to have the infor.
jbvdhp
Active member
I bought mine from Amazon. Make sure it's the one being sold by Amazon LLC. I got version 2 but the rollers were still installed backwards so you have to flip them.
Sent using your IP address
steallife904
New member
I just used 2 screws and washers and screwed in into the inside of my stand on the back wall. I did use one of those plastic pieces it came with on the back as kinda a spacer so my screw didn't go all the way through the stand. not idea what all those pieces where that came with the bracket.
mannyhernz
Member
jbvdhp
Active member
I don't. But we assume it is since it's the newer Jecod packaging and labeling.
Sent using your IP address
bfortune76
New member
Mine will be here tomorrow. Ordered from Amazon.
Similar threads
