Jebao WP60

[rvales]

I am wondering if this would work.
http://www.ebay.com/itm/Wireless-Mi...ltDomain_2&hash=item3380a79d33#ht_3268wt_1069
I know this works for the wp40
http://www.ebay.com/itm/DC-5V-24V-4...ccessories&hash=item2319c1479e#ht_5190wt_1204

 

[Sacohen]

I am wondering if this would work.
http://www.ebay.com/itm/Wireless-Mi...ltDomain_2&hash=item3380a79d33#ht_3268wt_1069
I know this works for the wp40
http://www.ebay.com/itm/DC-5V-24V-4...ccessories&hash=item2319c1479e#ht_5190wt_1204

The wireless RF one is 12A 144W rather than 4A 48W so I'm not sure if that would be an issue.
They are both 5-25V though.

It would be cool to have wireless control over the pump though.

 

[SimonSKL]

I am wondering if this would work.
http://www.ebay.com/itm/Wireless-Mi...ltDomain_2&hash=item3380a79d33#ht_3268wt_1069
I know this works for the wp40
http://www.ebay.com/itm/DC-5V-24V-4...ccessories&hash=item2319c1479e#ht_5190wt_1204

I don't think the 48W LED Dimmer will work as the WP60 draws 60W at full power.

 

[Hodge1995]

Does anyone know if the Variable speed power supply 12-24v made for wp-25/40 that is sold by fish-street would work to slow the speed down on the WP-60.

The stock controller has 3 different speed settings plus the 7 wave settings and a feed timer

 

[Sacohen]

Yes, but the 3 speed controls only work on the W1 setting, unless it has been changed in the WP-60, but I have not heard that.

 

[rvales]

I have 2 WP60s, but I haven't hooked them up yet. They are going into a 180 with a ton of live rock and I just wanted to make sure if the flow is too much I can lower it. So you think the wireles would work?

 

[SimonSKL]

I have 2 WP60s, but I haven't hooked them up yet. They are going into a 180 with a ton of live rock and I just wanted to make sure if the flow is too much I can lower it. So you think the wireles would work?

It may but I would caution not to get the voltage below 12V so you need to know where in the remote the 12V is so you won't go below it.

 

[rvales]

Simon,
Okay, is there a different one that you would suggest?

 

[rvales]

I can keep searching, but what are the specs that would be optimum.

 

[SimonSKL]

Simon,
Okay, is there a different one that you would suggest?

I don't have any specific one to suggest as I don't own a WP60. I would say any 12-24V dimmer rated at least 60W should work.

 

[rvales]

Thank you Simon. That would is enough to begin my search.

 

[rvales]

I found this this should work it has the correct voltage and it is rated for 8a.

http://www.superbrightleds.com/moreinfo/dimmers/ldrf-8a-12-24-volt-dc-led-dimmer-rf-remote/64/

 

[rvales]

I contacted Fish-Street and they said that the 12V to 24V Power Supply for Jebao WP-40 /WP-25 Replacement Pump will work with the WP60.

 

[DavidinGA]

I have 2 WP60s, but I haven't hooked them up yet. They are going into a 180 with a ton of live rock and I just wanted to make sure if the flow is too much I can lower it. So you think the wireles would work?

Use an apex or reef angel and it's easy. I run my two WP40'S through my reef angel with various power levels that change automatically all day long.

 

[Sacohen]

Same here, but I run a WP40 and a WP25, each on different speeds and can change the modes on both or one at a time easily.

 

[rhinonm]

Yes, but the 3 speed controls only work on the W1 setting, unless it has been changed in the WP-60, but I have not heard that.

I have a wp-60 and it has not been changed.

 

[Sacohen]

That's what I thought. Thanks for confirming that rhinonm.

 

[rvales]

Rhinonm,
You have one and you stated you have not used anything to lower the flow, but I purchased 2 for my 180 gal. and I think it is a little over kill and I don't want to blow the fish around the tank. Am I correct? or am I just over thinking it?

 

[djmx2002]

I am building a 265 gallon tank, 84x24x30, how many should I get?

 

[fletch999]

http://www.austinreefclub.com/topic/26903-jebao-wp-40-speed-control-mod/

This is what I did. You buy the dimmer on ebay for less than $10