LED Full Spectrum Controller based on Mega2560 board
- Thread starter kapelan
- Start date
tazzy123123
New member
Sorry that was the one I was sent this is mine and sorry for the bad drawing
tazzy123123
New member
That's the thing put together
tazzy123123
New member
I'm only running 22v and they have been running for 3 months
Raspberry PI coming
Raspberry PI coming
That's design for the device with web access:
Raspberry is optional.
Device is working fine without Raspberry PI.
Raspberry is used as a log server and provide remote access to the device.
So from somewhere on vacation we have 100% access including monitoring and control.
Failure safe: in case of Raspberry die - device still working as configured
Raspberry PI coming
That's design for the device with web access:
Raspberry is optional.
Device is working fine without Raspberry PI.
Raspberry is used as a log server and provide remote access to the device.
So from somewhere on vacation we have 100% access including monitoring and control.
Failure safe: in case of Raspberry die - device still working as configured
standard USB cable between Arduina and Raspberry and WIFI module to internet from Raspberry
Pinout
Pinout
One wire bus for temperature sensor DS1820 (support up to 4): A3
Timer DS1307 rtc( 42,43)
LED pins: 13,12,11,10,9,8,44,45
Cooler for LED: 46
PH: A1
ORP: A0
Power lines: A8,A9,A10,A11,A12,A13,A14,A15
Overflow sensors: A4,A5,A6,A7
Pinout
Pinout:
One wire bus for temperature sensor DS1820 (support up to 4): A3
Timer DS1307 rtc( 42,43)
LED pins: 13,12,11,10,9,8,44,45
Cooler for LED: 46
PH: A1
ORP: A0
Power lines: A8,A9,A10,A11,A12,A13,A14,A15
Overflow sensors: A4,A5,A6,A7
Last edited:
PCB with 8 drivers.you also hand made the driver's to right?
Each of them up to 1000mA.
Buzzer modules
Buzzer modules
So do i connect the buzzer modules on the same pins as the overflow sensors , sorry if this is a a silly question.
Buzzer modules
So do i connect the buzzer modules on the same pins as the overflow sensors , sorry if this is a a silly question.
v2.11
v2.11
v2.11
https://drive.google.com/folderview?id=0B42ZJMUnbPuWNktMcGNfR0E4QkU&usp=drive_web#list
added Calcium probe, Night time switch.
v2.11
v2.11
https://drive.google.com/folderview?id=0B42ZJMUnbPuWNktMcGNfR0E4QkU&usp=drive_web#list
added Calcium probe, Night time switch.
Hi kapelan
Thank you so much for this great thread I really do know how to thank you about it
Its a good thing to share that work with friends here .. So as I am so noob to electronics but I take a decision to diy my led system and controller I already bought arduino mega2560 rev3 from here http://mobile.ram-e-shop.com/cat/mobile/product_info.php/products_id/2147
And also the rtc http://mobile.ram-e-shop.com/cat/mobile/product_info.php/products_id/2975
And the TFT LCD http://mobile.ram-e-shop.com/cat/mobile/product_info.php/products_id/2699
The TFT is the most expensive part by the way
I also ordered the odd drivers with PCB from here
5UP Ldd-700H Meanwell Driver on PCB + Dimmer control for Lumia 5.1 100W LEDs
http://s.aliexpress.com/qYniYJf2
Anyway if I get this items above connected somehow that I really do know yet how to connect them and uploaded your software gonna work and I can control with the LCD screen above also how to get the fan cooler for heat think to be run only at certain intensity and not running in low dimming levels and how to connect it ...
Thank you again and if you could help I really be thankful
Thank you so much for this great thread I really do know how to thank you about it
Its a good thing to share that work with friends here .. So as I am so noob to electronics but I take a decision to diy my led system and controller I already bought arduino mega2560 rev3 from here http://mobile.ram-e-shop.com/cat/mobile/product_info.php/products_id/2147
And also the rtc http://mobile.ram-e-shop.com/cat/mobile/product_info.php/products_id/2975
And the TFT LCD http://mobile.ram-e-shop.com/cat/mobile/product_info.php/products_id/2699
The TFT is the most expensive part by the way
I also ordered the odd drivers with PCB from here
5UP Ldd-700H Meanwell Driver on PCB + Dimmer control for Lumia 5.1 100W LEDs
http://s.aliexpress.com/qYniYJf2
Anyway if I get this items above connected somehow that I really do know yet how to connect them and uploaded your software gonna work and I can control with the LCD screen above also how to get the fan cooler for heat think to be run only at certain intensity and not running in low dimming levels and how to connect it ...
Thank you again and if you could help I really be thankful
So my friend could you plz offer a LCD screen to use it I am gonna buy some items from aliexpress so I can get the LCD from thereit was created for 3.2"TFT, I'm afraid you will have a trouble with 5" display.
