Let's talk about Alkalinity, Calcium and Magnesium in an SPS Tank

Capn,

You have to go over to the states and sneak it back into Canada. You cannot buy pickling lime in Canada.

I have used the slurry method for a while now. On a system with 450 gallons of water I add one or two teaspoons of kalk in a 1 litre jug and stir it up really well and dump it into the high flow area of the sump. On my system the 1-2 teaspoons a day (not every day but more often then not) does not really affect the Calcium or alkalinity levels at all but it does keep the pH from dipping under 8.0 and generally keeps the pH more stable, which is why I started doing it.
 
<a href=showthread.php?s=&postid=10549526#post10549526 target=_blank>Originally posted</a> by capn_hylinur
when I asked my supplier he convinced me not to use kalk without dripping--said it was messy and easy to error?
After talking to you guys --I don't see a problem with this?

I've been using mine with an auto topoff for about 3 years with no problems. Much much easier than dripping and much more consistent. Just make sure you use an auto topoff system that adds small amounts at a time.
 
<a href=showthread.php?s=&postid=10549526#post10549526 target=_blank>Originally posted</a> by capn_hylinur
..........said it was messy and easy to error?

it's messy if you're so inclined to slosh the heck out of it when making up a slurry, 99% of people are capable of doing it with minimal to no mess at all and if you test your system, find the proper dose and then add that much it's no different then any other additive/supplement you add to the system 99% of people are talented enough to do that as well, i guess your supplier is that 1% :)
 
<a href=showthread.php?s=&postid=10549546#post10549546 target=_blank>Originally posted</a> by JetCat USA
it's messy if you're so inclined to slosh the heck out of it when making up a slurry, 99% of people are capable of doing it with minimal to no mess at all and if you test your system, find the proper dose and then add that much it's no different then any other additive/supplement you add to the system 99% of people are talented enough to do that as well, i guess your supplier is that 1% :)

thanks--I'll start using it---he knows I am a chemistry/biology teacher----we only slosh the heck out of our tim hortons coffee :)
 
<a href=showthread.php?s=&postid=10549546#post10549546 target=_blank>Originally posted</a> by JetCat USA
99% of people are talented enough to do that as well, i guess your supplier is that 1% :)
Or could it be that I just bought 4.5 pounds of kalc for $9.99 which should last me well over a year and there is more profit to be made from other alk/calc supplements?:lol2: :lol2: :lol2:
 
With the advent of the internet and a computer connected to it in most homes these days LFS owners who consistently give poor advice will find that their margin of profit would be much higher if they actually gave educated advice rather then discouraging their customers to the point they take their business elsewhere.

I'm sure if capn's supplier had been so kind as to say "Yeah, that Kalk stuff works just as good as any other additive, it can be messy and you need to be careful getting the right dose", he'd of bought some that day
 
<a href=showthread.php?s=&postid=10549764#post10549764 target=_blank>Originally posted</a> by JetCat USA
With the advent of the internet and a computer connected to it in most homes these days LFS owners who consistently give poor advice will find that their margin of profit would be much higher if they actually gave educated advice rather then discouraging their customers to the point they take their business elsewhere.

I'm sure if capn's supplier had been so kind as to say "Yeah, that Kalk stuff works just as good as any other additive, it can be messy and you need to be careful getting the right dose", he'd of bought some that day

actually he is a mail order supplier--not live fish---and one of the guys I trust---maybe he doesn't trust me cause of the coffee stains on my shirts _LOL

LFS---that's a hole ball of worms---criticism of them got me in hot water with my local reef site. I don't know if I should get into that here say I agree 200 per cent what you said above.---and I have learned the value of a guarantine tank for many reasons.
 
ok, I use my ACIII to pump my kalkwasser at 8.13. after messing around with the sump fan speed and the lower limit ph I have gotten it to about match evaporation at 5 gal ~3.5 days. currently I am adding iodine to the kalkwasser. is there any reason I can not add Mg to the kalkwasser. ie: test, do the chart, add X amount of mg to kalkwasser, test again in 3 days? or can I just dump it in my sump..
 
i have a question. if you use a calcium reactor without a pH monitor and simply have it on a timer, is there anything else you should be supplementing, like randy's two part?

sorry if it's a dumb question.
 
<a href=showthread.php?s=&postid=10580213#post10580213 target=_blank>Originally posted</a> by The Reefer91
i have a question. if you use a calcium reactor without a pH monitor and simply have it on a timer,

Are you talking about running the CO2 on a timer? If so that's not a good idea IMO. Without a controller you just need to set your bubbles count and drip rate at a reasonable rate for your tank volume and then test ALK/Calc daily until you get it set where you need it.

As far as a PH monitor you should have some way to check PH in a reef tank even if you are not running a calcium reactor, but neither a ph controller or a ph monitor are required equipment for a reactor.
 
wait, but wouldn't that mean i would need to continously run the reactor? or would the CO2 just pool up inside the reactor?
 
<a href=showthread.php?s=&postid=10580329#post10580329 target=_blank>Originally posted</a> by The Reefer91
wait, but wouldn't that mean i would need to continously run the reactor? or would the CO2 just pool up inside the reactor?
A calcium reactor is a continuous operation piece of equipment.
 
My Calcium levels are pretty steady anywhere from 425-455ppm, my Alkanity is running pretty high dKH 14 (is this bad) and my Magnesium is at 1350ppm. I'm topping off with R/O water trying to get the dKH to come down a bit and I heard that with higher Mag levels you get better Coraline growth? Is there any truth to that?
 
My Calcium levels are pretty steady anywhere from 425-455ppm, my Alkanity is running pretty high dKH 14 (is this bad) and my Magnesium is at 1350ppm. I'm topping off with R/O water trying to get the dKH to come down a bit and I heard that with higher Mag levels you get better Coraline growth? Is there any truth to that?
 
<a href=showthread.php?s=&postid=10595648#post10595648 target=_blank>Originally posted</a> by apbt217
My Calcium levels are pretty steady anywhere from 425-455ppm, my Alkanity is running pretty high dKH 14 (is this bad) and my Magnesium is at 1350ppm. I'm topping off with R/O water trying to get the dKH to come down a bit and I heard that with higher Mag levels you get better Coraline growth? Is there any truth to that?

14 dKH is a little high. I try to run it around 8.

Topping off with r/o water is what you should be doing. You need to stop dosing to get your alk down.

I did not notice any change in coralline growth when I had higher mg levels.
 
<a href=showthread.php?s=&postid=10597033#post10597033 target=_blank>Originally posted</a> by JB NY
14 dKH is a little high. I try to run it around 8.

Topping off with r/o water is what you should be doing. You need to stop dosing to get your alk down.

I did not notice any change in coralline growth when I had higher mg levels.

the question becomes--why is your dkH so high-----
Are you using buffers to control your pH----- most contain boron which will up your dkH readings.
 
Back
Top