live rock, 120G and more FS

[oncampus1]

UPDATE

UPDATE

Here's an update on what's sold and what's left:

SOLD ITEMS: 120 tank/stand (medic29); MH/PC pendant fixture (seachel71); 40G breeder tank (epon); 30 lbs of LR (seachel71/garlicman)



REMAINING ITEMS:
Live Rock (~20 lbs) small to mid-sized pieces - $2.50/lb.

Hamilton 48" light fixture (2x250W SE MH, 2x48" VHO), electronic ballasts - will include NEW bulbs VHO and MH - $425

Euro-Reef skimmer w/Sedra 3500 (slightly older version of the $300+ RS-135 model) - $125

2 SQWD's - $20 ea or $35/pair

15G tank (used for refugium & drilled high for gravity feed to main tank) - $25

Coralife 24" PC (2 x 55W) fixture (used for fuge) w/1 new bulb - $55

Mak-4 pump - $60

Kent RO unit (needs all new stuff inside) - $30

Skimmer (can't remember brand right now) would work for 120G with low bio load or anything smaller - $50

 

[oncampus1]

UPDATE #2

UPDATE #2

All live rock and 2 SQWD's now sold.

I would really like to get the 48" Hamilton light fixture moved out. It would cost about $900 new, and I am including all new bulbs. New price = $400.

 

[oncampus1]

UPDATE 1/29/07

UPDATE 1/29/07

REMAINING ITEMS:

Hamilton 48" light fixture (2x250W SE MH, 2x48" VHO), electronic ballasts - will include NEW bulbs VHO and MH - $400

15G tank (used for refugium & drilled high for gravity feed to main tank) - $25 (pending scottflanagan)

Coralife 24" PC (2 x 55W) fixture (used for fuge) w/1 new bulb - $45

Mak-4 pump - $60

Skimmer (can't remember brand right now) would work for 120G with low bio load or anything smaller - $50 (pending scottflanagan)

40BR tank drilled w/bulkheads. 2-1" holes at top in one corner, 3/4" hole at bottom of opposite corner. 3 bulkheads included. - $50

 

[seldon]

Is this the same 40BR that you used for your grow out tank? Also, have any other pics that what are on the website of it?

Seldon

 

[oncampus1]

seldon,

Yes, this is the former grow out tank. FYI the tank has a chip on the outside of one corner. That chip was there for a long time when I had water in the tank, so I know the seals are solid. I don't have any pics except for the ones on the CIMA site. Let me know if you have any questions.

Ryan

 

[seldon]

So are the holes drilled like this?



Thanks Ryan

Seldon

 

[oncampus1]

The 1" holes are next to each other at the top. The 3/4" hole is actually drilled on the end of the tank in the corner opposite the 1" holes. Hope that makes sense!

 

[seldon]

Ryan, would you be available Friday late afternoon/evening for me to come by and take a look and maybe buy?

Seldon