Local Tank Drilling?

[insanefishguy]

Does anyone local drill tanks or know of a place that drills tanks? I have been putting this off for so long. I really don't want to spend a fortune to get it done. Something fishy charges $20 a hole. That seems steep to me, but then again, I tend to be a cheapskate.

So many people say its easy to do yourself, but I tend to be pretty clumsy with do it yourself stuff, so I dont want to risk breaking the tank.

Thanks, Joe

 

[rigleautomotive]

joe,if you are trying to get it done cheaper than 20 ,you should look into buying a bit on ebay (they are cheap there) and doing it.it is not hard if you take your time drilling,it can be done without incidence with a regular drill.i dont know of anyone cheaper that is better than you doing it yourself.the glass shops usually charge 25.another lfs charges 25 also.i believe you may be able to borrow the bit if you ask nice. Dan

 

[cccapt]

I drilled the 55 I'm using as a sump. Bought the bit on Ebay for $6. It's really not hard to do. The worse part is the noise of the glass grinding.