Lots of stuff for sale: Lakeland (Pic Heavy)

bkwudzjeep

O|||||||O
While getting my 120 going, I am finding all sorts of stuff and cleaning out some the things I have accumulated. More things may be added as I see them. All items can be picked up and some may be shipped.

I will hold item for 24 hours without deposit after I provide my paypal.

**All items are located in Lakeland, 33813.
**Everything is in working order, unless specified¡K..

1) 1¡¨ flex tubing---$10 for both
-~39inches in length from end to end
IMG_0723.jpg


2) Reflector from hellolights-$20
-36¡¨ reflector (good for 2-4 bulbs, new with plastic)
100_1993.jpg


3) Power compact bulb (NEW) from hellolights--$20
1-34¡¨ 96w 10k
IMG_0726.jpg

IMG_0728.jpg


4) Berlin Red Sea Skimmer-$10 obo
-this is probably mainly for parts. I think one of the inside pieces is broken as well, but not totally sure....it wobbles more than I think it should
-maybe could be used as an ozone reactor???, or get creative with it
IMG_0721.jpg

IMG_0722.jpg


5) Red Sea pump-$20
-not sure on rating, but seems to move water pretty well
-good for added flow, mixing vat, or just moving water from point a to b
100_1895.jpg


6) VHO clips-$free with purchase Æ'º
-7 of one type and 1 of another
100_1923.jpg


7) Hanging Pendant Light Kit-$5 obo
-for 1 pendant, not sure on brand, modern looking style
-it is 11¡¨ long, and 4.5 feet of cable to hang from ceiling+
-metal piece to connect the pendant is 2.5¡¨ tall, looks pretty nice
100_1941.jpg


8) (1) 3¡¨ and (3) 4¡¨ Icecap Fans--$65 shipped for all four
-sensors may be broken because they run full blast all the time, all fans work
-could be serviced through icecap (great customer service)
-about 5 years old (in a box for the last 3 years), regular wear and tear
3¡¨ fan -measures ~3 1/8¡¨ square (3¡¨ fan)
-cover does not fit but will include it as it came with it when I bought it
-was sold to me used as an icecap, but not sure if it is
-needs a transformer (can use an old cell charger or get a variable speed transformer for $5 at Harbor Freight)
4¡¨ fans -measures ~4 11/16¡¨ square (4¡¨ fans)
-these sell for $48 each at Dr Fosters/Smith
-include original icecap transformers
-one fan is noticeably louder than the other two, I have noted which one it is
-grills include some rust (icecap may replace?)
IMG_0720.jpg
 
9) Tunze Stream 6000 (controllable) w/ suregrip magnet mount--$200 shipped
-For aquariums from 52 to 264 US gal.
-Flow rate: 660 to 1,849 US gal./h
-Energy consumption: maximum 15W Voltage
-brown, probably 3 years old, I bought it used a year ago, cleaned it up, but never got to use it, it works great when tested
IMG_0716.jpg

IMG_0717.jpg

IMG_0715.jpg


10) Tunze 7091 single controller----$45 shipped or $30 if bought with 6000 above
-use to control controllable Tunze stream pumps
-about a year old
IMG_0718.jpg


11) AlgaeFree SureGrip 50 magnet----$20 shipped
-comes with all attachments for use with Tunze Streams (6000, 6100), Seio (620, 820) and Maxijets (400, 600, 900, 1200)
-use for glass up to and including ½”
IMG_0719.jpg


12) Tunze Skimmer 9010----$200 shipped
-I bought it used (on a heavily stocked 120) and never used it myself. After I received it, I noticed an o-ring, foam piece and the air screw missing, but I ordered all but the foam from Tunze. The o-ring was installed and the screw is in the bag. Many don’t use the foam for maintenance purposes, but I will include some filter floss to wrap around the outlet pipe.
-The picture is from the guy I bought it from
-Recommended for aquariums up to 1,000 litres (264 USgal.) of saltwater but is probably best for an average stocked 120 gallon or smaller
-Dimensions: L125 x W113 x H418 mm (L4.9 x W4.4 x H16.8 in.)
-Power Ratings: 115 V / 60 Hz - 21 W
-Water throughput: 1,200 l/h (317 USgal./h)
-Air capacity: 650 l/h (171 USgal./h)
-Skimmer cup volume: .7 l (.18 USgal.).
-Equipped with the accessories for internal and aquarium cabinet operation and mounting hardware.
tunzeskimmer1.jpg

IMG_0712.jpg

IMG_0713.jpg

IMG_0714.jpg
 
13) Korallin C-1502 Calcium Reactor w/ Eheim pump-$200
-connector and bubble counter area were broken, has been fixed, was run and did not leak, was told it would not affect performance
-may be converted to a denitrator with kit from MarineDepot
-includes $13 pinch valve
IMG_0724.jpg

IMG_0725.jpg


14) Wavemaster Pro--$90 shipped (these go for about $85 shipped consistently on Ebay and you don’t have wait and bid on this one)
-Bought this a year ago and never used it
-Just tested it out and all channels worked perfectly
100_2107.jpg

100_2106.jpg



Thanks for looking!!
 
Tunze single controller sold.....thanks!!

Halide hanger went to a neighbor, then to a scrap yard.....

Red sea skimmer is going to be cut apart for the acrylic cylinder for some diy project that doesn't exist yet.... :)

Everything that shows a picture is still available.....
 
Back
Top