making sure I have my Power Bar installed correctly

brascal1

New member
I have a profilux III and a Profilux Aquatic Bus Powerbar6D-USA/CND-APB 125VAC 60Hz Max 1875W, which from what I understand is a digital Power bar. The cable that comes with it from what I read goes from one of the sockets on the Power bar to socket 15 PAB on the controller. But from what I read elsewhere a digital bar is connected to S1-4.
What is also confusing is under socket functions there is a checkbox "Digital powerbar connected on S1-S4". I have not checked that on and see that there is a greyed out box "Program digital powerbar or dosing pump unit..." that I can't get to either....
 
Ok, this should clear things up.

there are three, yes 3 different kinds of power bars for the profilux.

1.) Analog (older style, typicaly come with econo packs for the PII)
2.) Digital (S interface)
3.) PAB (also digital, but uses the PAB interface, this is what you have)

When the software refers to "Digital" devices they are referring to the Digital devices that connect to the S ports, not the PAB devices like your power bar.
 
I am running three Digital power bars, do i just add the PAB at the end of the three power bars? or do i add it onto s5-s8 outlet on the controller?
 
Back
Top