Manifold question

[AngelandNathan]

For a tank I'm building I plan on plumbing a manifold to feed some reactors. The return line is 3/4", should my valves for the reactors be 3/4 also or would using 1/2" work well enough. So far I'm just planning on having separate carbon and Gfo reactors.
Thanks for any advice

 

[rogergolf66]

1/2 is plenty. I would make the valves threaded then thread a 1/4 push connect into the valve so the 1/4 tube from reactor can plug right into valve

 

[AngelandNathan]

Awesome thanks Roger

 

[Elricsfate]

You'll probably want to verify the input/output sizes for the reactors you plan to use. Some of them are bigger than 1/4 inch. Like the ones BRS sells for example.

 

[AngelandNathan]

thanks they will be brs reactors so I'm going with 1/2" valves