Manual for fleece roller

[doubleohwhat]

Is there a manual for the fleece roller system? I can't seem to find one online.

I want to make sure the timer is set correctly and I need to know what level to set the sensor on the outset of the sump at. It was loose when the sump arrived.

 

[slief]

Is there a manual for the fleece roller system? I can't seem to find one online.

I want to make sure the timer is set correctly and I need to know what level to set the sensor on the outset of the sump at. It was loose when the sump arrived.

If you just bought the new Dreambox, there should be a manual for the timer in the bag that was included inside the dreambox. You have 2 settings. One for the amount of time that the motor waits after the filter compartments capacitive level senor detects a water level increase. The second setting his how long the motor runs for once it's triggered. This will determine how much fleece you role out which is dependant on your preference. You can test your settings by unscrewing the thumb screw that holds the sensor in place on the left side of the dreambox. Then remove the sensor from the holder and put your hand over the side that faces the inside of the sump. That will trigger the timer and ultimately the motor. Now keep in mind that the countdown portion of the timer is also a preference thing. You need to ask yourself whether you want the motor to role out new material as soon as it senses a level change or wait a few minutes or more before rolling out new material. Also note that the level sensor can be adjusted up or down depending on your desired sump level. As such, there is no "œright level. It will need to be adjusted based on the level you want your sump at. You can test this and then pop the roller out of its holder in the drying chamber and role it back out if you need to.

 

[slief]

Here is a quick video that shows how to setup the fleece timer and sensor.
https://youtu.be/qnKFzzQg5ss

 

[doubleohwhat]

Thanks! I looked through everything that came with the sump and there's a manual for everything but the timer.

 

[slief]

The video along with what I mentioned above covers everything you need to know but for reference, here is a manual for the timer controller itself. More complicated than it needs to be and the switches are already setup for this application but here it is anyway.
https://www.panasonic-electric-works.com/pew/cz/downloads/ds_lt4h_en.pdf