may meeting work shop, DIY kalkreactor

Anyone that can bring pvc cement and or teflon tape woud be a great help. There is not much to glue but with 42 of them going together the more cement we have the easier it will go for everyone.
 
<a href=showthread.php?s=&postid=7392534#post7392534 target=_blank>Originally posted</a> by pastelball

What is the estimated time off building? As long as everything goes well.

depends on if you glue your fingers together or not :lol:
 
Ok, after seeing the other Club House set up for a fairly large gathering we had to move from the other Club House it could get really tight. So what I was thinking is let's have it over at our usual place of meeting. Right now it's just a concrete floor but every thing is still functional. We can still set up the long tables and round tables. Plus if any one spills glue(me included) it wont be no big deal.
How does every one feel about that?
 
I am okay with that Brian, and I doubt anyone else would care about the condition of the floor. Do you need to check to make sure we can use it? Let us know ASAP so we can get another email out to the members stating the location will be at the normal meeting place.
 
Already did, I asked myself and I approved it. ;)
For all the new visitors you will please have to excuse the way it looks right now. It normally looks far better than it does now. In fact the new floor going in is going to be 18"x18" Porcelain Tiles. Should look real sweet.
 
I love tile floor. could you put a note on the other clubhouse directing members to our normal location day of the meeting? I will get an email out with the correction.


thanks Brian :thumbsup:
 
thanks for the work you are doing on this Brian.
the tile floor sounds nice.
even better no future water damage from the sprinklers or us :)
 
Back to plan B

Back to plan B

Our regular location is being tiled and unavailabe

We will be moving to the other side of the lake. When coming from 33 go past Lake Shore and turn right onto Quarry Lake. It's the first right after Lake Shore. Just follow Quarry Lake to the main club house. The address is 2550 Quarry Lake Dr, 43204. For you Map Questers.

So if coming from 33 or from campus on 5th Ave go west on 5th Ave and turn right on to Quarry Lake. It is the second right on 5th Ave West of 33 and the river.
If coming from McKinley go east on 5th and turn left on Quarry Lake. It will be the first left after you go around the curve and down the hill on 5th. If you make it to 33 then you went to far.

Our Apologies for any confusion
 
Ok, after seeing the other Club House set up for a fairly large gathering we had to move from the other Club House it could get really tight.

is the other place going to be big enough?



*** how do you do the orig posted by.....
 
yes the normal clubhouse is huge this is a bit smaller but will be ok.

click the quote button in the upper right corner of the post :)
 
<a href=showthread.php?s=&postid=7397951#post7397951 target=_blank>Originally posted</a> by szwab
yes the normal clubhouse is huge this is a bit smaller but will be ok.

click the quote button in the upper right corner of the post :)


ahhhhh....much easier than hunting it down and cutting and pasting......
 
<a href=showthread.php?s=&postid=7397794#post7397794 target=_blank>Originally posted</a> by salreus
is the other place going to be big enough?



*** how do you do the orig posted by.....

The one we are going to be at is big enough for the size group we are going to have. Just has stated by szwab the usual meeting spot has the big open Hall. The new location for this meeting is actually rated for 65 people. It's just with all the tables and chairs in it, it get's a little tighter. But we will be ok.

Sorry for changing it like this on such short notice. I do feel real bad about it.:(
 
<a href=showthread.php?s=&postid=7400240#post7400240 target=_blank>Originally posted</a> by sixxer
George,

Is it too late to get in on this opportunity?

Thanks

all the units are spoken for.we had a few extra but they have all been claimed
 
<a href=showthread.php?s=&postid=7400209#post7400209 target=_blank>Originally posted</a> by CaveManNOhio


Sorry for changing it like this on such short notice. I do feel real bad about it.:(



No worries bro!! :)
 
Back
Top