MH coverage area

firewill65

New member
Can anyone please tell me the approx. coverage area a 250MH HQI puts out at an average distance of 6inches above the tank? My tank is 72x18x29. I'm thinking of going with 3, 250watt MH's combo'd with T5's. Could I use 2 175 watt MH's on each end and one 250 in the middle to save on electricity? Any suggestions would be greatly appreciated. Thanks
 
<a href=showthread.php?s=&postid=8947987#post8947987 target=_blank>Originally posted</a> by AZDesertRat
Depending on the reflector its about 2'x2' per bulb.
ditto
 
250's I have the aqua medic over a65 gal and i have lots of light its going to depend on the height that you have your lights like alredy stated. Heck i ran 2 400's over my old 170 that was 5 feet long. Im really happy with the Hqi on the tank I have the louvers that hang on the side to help redirect the light into the tank...
 
is it safe to say the higher the light is mounted over the tank, the larger the footprint of light? I realize it would be less intense the higher it is mounted.
 
175s on the end and a 250 in the center should work just fine for coverage, but you may have a slightly tougher time getting colors to match exactly... if you are worried about that.
 
<a href=showthread.php?s=&postid=8949013#post8949013 target=_blank>Originally posted</a> by 46bfinGA
would a 250 watt HQI fixture with 2-24" T5 actinics be ok over a 36"x36" cube?


any opinions on this?
 
im running 2x400W DE bulbs on my 36x36x30 cube and i think its perfect...lots of light in the middle and the edges are a little darker for lower corals. these are icecap horizontal pendandts. heres a pic. the tank is still a little cloudy in these pics as it was the day after i added the rock. the light spread is a little better now.

front view

100_0878.jpg


side view

100_0879.jpg
 
Back
Top