Mitras 6200HV available plus upgrade options

AQD_ottawa

New member
We are pleased to announce the newly launched Mitras 6200HV is now available for pre order. Price as before $1,199.00

The difference is in the blue component - more blue is available in the spectrum.

For current 6100HV owners as the cost is high for the upgrade as it does involve changing all 6 arrays we are going to offer this out for now anyway at my landed cost, zero profit for moi :( but keeping the people happy that do want this feature the cheapest possible option.

We do not normally do anything direct but this is a unique case and to benefit all our current users.

So if interested the upgrade pre order price is $249.00 per lamp. (plus a few dollars in shipping)
 
Last edited:
+1..
i'm interested as well about how difficult the change-out is..
i'd seriously consider doing the upgrade for my 3 lamps.... and i haven't even run them over a tank yet..
ugg...
is the new blue led replacing the yellow?
and is the extra blue a different blue than the existing leds or is it a new colour?
 
Yes its easy to do, too easy to be honest ;)

Depth - 30" plus but of course effective as the 6100 on lower depths due to customization of your lamps output.

Here are the two comparables

Mitras LX 6100 HV

LX6100HV_All100_new_300x72_1.png


1000 K - 24000 K
9200 K
Marine water (higher - medium reef)
9 separately dimmable colors:
12 x Cree XP-E blue, 12 x Cree XT-E cool white, 12 x Cree XT-E royal blue, 6 x Cree XT-E neutral white, 6 x Osram Oslon SSL true green, 6 x Osram Oslon SSL yellow, 6 x Osram Oslon SSL red, 6 x Osram Oslon SSL hyperred, 6 x hyper violet 425 nm

Mitras LX 6200 HV

LX6200HV_All100_300x72_1.png


1000 K - 24000 K
9500 K
Marine water (medium - deep reef)
9 separately dimmable colors:
12 x Cree XP-E blue, 12 x Cree XT-E cool white, 12 x Cree XT-E royal blue, 6 x Cree XT-E neutral white, 6 x Osram Oslon SSL true green, 6 x Osram Oslon SSL sky white, 6 x Osram Oslon SSL blue white, 6 x Osram Oslon SSL hyperred, 6 x hyper violet 425 nm
 
If you have a 6100 HV and a 6200 HV, I'm guessing that they have to be controlled separately? That is, they cannot be set up as master and slave?
 
Fyi everyone that tomorrow is the last day to get the upgrades in at $249 after that they will be $299 and dealer purchase only.

9am eastern time tomorrow deadline ends, absolute no extensions as we have to finalize our order.
 
Looks like the 6200 will be a better unit for reef tanks as you will be able to run them on full power without getting the red/pink colour of the 6100 at full power.
 
Hi AQD, appreciate the information.

I currently have 2 6100s on each end of a 6 foot, 31 inch deep reef tank and am looking to purchase the last Mitra for the middle – would you suggest a 6100 or a 6200?

My concerns are (1) Colour differences with the 6100 at the ends and the 6200 in the middle (2) Programming issues – having to program both sets individually.

As an aside, can a Profilux control both sets?

Thanks!
 
Back
Top