More Flow!

[gasman059]

ok guys here it is .

ok guys here it is .

I followed all d recs as u can tell by this pics, anything else please.
original mod

[/IMG]
above w/o d black and red below with it(wich one) seems to me d one above b/c the one with d black and red stopper wont fit into d endcap

[/IMG]
here they are with the exposed 1/4-1/2 metal tip exposed, I i will get them staright by d way

[/IMG]
the final product, I will b testing tomorow just wanted to share some pics to eric and evil and u guys to see if i followed his advice to a tee

[/IMG] :mad2: anyways we all know that patience is a virtue in this game LOL:rollface:

 

[gasman059]

by d way is it enough space at the end of d orecut metal bar?
anyways I will be testing tomorow, it's frikin late and if i start now by d time i'm done it will b 3 am LOLOLOL
thanks and wish me luck. I will b chekin back durin d day for any additional comments and suggestions thanks again and happy reefing to all.

 

[evilsike]

I don't think it's enough space IMHO.
you know where have have the rigid plastic that's attached to your prop? cut the other side if you need to (pointing magnet side), small increments at a time.

yea, you still need the black/red caps on both sides. on mine, one was attached to the "Cap Ring" shape.

 

[evilsike]

 

[gasman059]

Hey man great i will bdoin that this afternoon, . i will b doin that . as far as d black and red endcap yes or no on both sides . I look like it will restrict the movement but hell wat d i know THANKS

 

[gasman059]

thanks on both sides it is then

 

[RichConley]

Both sides gasman.


One thing, put the steel rod in a dremel, stick it in the impellar, and turn the dremel on. It'll smooth everything out, and make it run cleaner.

Nice tank, btw.

 

[gasman059]

thanks will be tryin one thing at a time and then the dremel rec

 

[gasman059]

alright buddy everything is okdone as per u guys help thanks i will be postin pics soon

 

[gasman059]

o well the mods work great tonight thanks to all d recs, I'm really trying to find an aesthetical way to setup my tank , i guess i will continue to post and listen to u guys and your advices.

 

[gasman059]

ok the mods are done and man they do put a lot of flow, in fact to much, i tried them on the sides on my setup it was a total disaster, lol sand all over d place u name it the alveopora was almost out of the rock LOL. Really need to set them in fornt of d tank and point them towards d middle of my setup in d sps area, so i can create some chaotic flow before i populate. Needless to say I will be doin lots of aquasculpturing during the holidays , that is providin the family does not call LOL.here's d pic

 

[gasman059]

pic !

pic !

sorry late night and too tired , but hopefully evil and eric and waldomas get d idea. by d way no more chattering. I believe the adequate place for them is on each corner facing the middle, Now comes the task of placement and rockwork movement. boys-always plan ahead and then plan ahead some more.

[/IMG]

 

[Mike de Leon]

Hey guys...I just ordered two MJMods for MJ1200. Will this be enough for a 135? Also, is the bellhousing a standard with all the kits or is it an option only?
Thanks in advance.

 

[gasman059]

maybe 3 but two high flow sets should suffice, or close to. standard with d new kits

 

[Mike de Leon]

THX GASMAN...
$60 bucks for the mod...can't beat that! (Including shipping!)

 

[Mike de Leon]

BTW, MY MJs are mounted on magnetic algae cleaners worth $12 each. Works really well..

 

[evilsike]

stock MJ on what kind magnetic cleaner?
the modded one will give you more umph and might need a stronger magnet.
magfloat350 worked for me, but then again, I have the magnet on one side while the mj is on another. (page 3)

btw, congrats gasman, now all you have to try is turn it off and on again just to make sure it hits the stopper and reset to the right way

 

[gasman059]

hey evil

hey evil

i will be doin something like the pic from eric stay tuned for my next project, but yes they r rokin
I did get some plexi glass today and some plastic nuts and wingnuts as well a heat gun to try to reproduce eric's setup with some mods. will see LOL:smokin: :smokin: :smokin: :rollface:

 

[gasman059]

evil here it is / thanks to ericfl with some of my own mods/ plastic screw and wingnut/ hopefully by d weekend i'll have the holders bent and cut. will post progress

 

[gasman059]

pics

pics

thanks to ericfl, and d magnificent dremel.

[/IMG]