Mp 40 set up advice.

cyclefreak

New member
Just ordered my first Ecotech MP 40 today from Bulk Reef Supply. Just wondering if anybody has some tips on set up and what settings I should run. I have a 120 gallon Aqueon Mega dual overflow dual return glass aquarium. I just want to set this up right the first time. And by the way this is a mainly SPS tank.
 
I think we have the exact same tank. I have mines about 3-4" below the surface and I have one on each sides right on the center. I have 2 so you might put yours in a different spot. Remember to set your pin spacer correctly and line your dry and wet side up correctly. You know you lined it up correctly when it isn't making clacking/cracking sounds and the sound from the pump is minimal. I have mines set on reef crest and sometimes pulse mode at 80%. You will quickly realize one mp40 isn't enough. GL! ;)
 
i have 2 mp40 in my 120; one one each side; one low and to the back shooting behind the rock and the other one is on the opposite side, about 5 inch down from the top in the opp corner; trying to get a circular flow thng going. Am open to any other ideas; will try them!
 
Back
Top