My 75 gallon SPS Zeovit build

Treed

New member
I figured it was time to start my tank build! I'm very excited to try a zeovit tank.

My plan for this tank is to be almost all SPS with some gorgonians.

So a little about the tank:

The main display will be 75 gallons
27 gallon frag tank
Sump- 30 gallon

Equipment-
Tek Light 8 bulb fixture
Vertex Omega 150 skimmer
10 gallon tank for ATO w/ Tunze Osmolator
Vertex 1.5 Zeovit Reactor
Water Blaster 10000 return pump
2x Eheim 200W heater

Currently building the sump and hope to start plumbing in a few days. This build will be a little slow but it will get there.
 
I would like to start my project soon as well, but I am still in planning stage . let me know how it goes and what difficulties will u experience with the system
 
Update on my build! Got it up and cycling. Would love to hear from other Zeovit users about what products they use and how often they dose them. Any other comments are always welcome as well. Here are some pics.
 
The power head I'm using is on wave mode so there is a wave in the tank about 2-3 inches tall so I'm running the water level lower.
 
Great start...wait till tank is low nutrient stable before other additives are used and I would start with one at a time so you can see how the additives affect your tank if you use zeospur becareful and use small amounts of additives first..give your system to mature it takes time for the proper bacteria to build up if start putting alot of corals and fish u might run into some issues and I see u are using vertex for ur rocks put the tiny rocks into a mesh bag you will thank me later..
 
Update time! Got a few corals and they are doing well. Figured I would start off with some easy ones first.




And a FTS
 
Back
Top