Stolireef
Active member
This is a really good thread in the general reef discussion forum.
I posted there that the wires associated with all of the equipment we use drive me crazy (I also had a bit of fun with poetry). With that in mind, I decided to take an inventory of the number of wires under my tank and what they are attached to. Keep in mind that I'm running a 110 rimless with a sump and separate fuge. I run a calcium reactor, skimmer and a comination MH/T5 fixture. So, starting from the top...
Hamilton Fixture: This is the biggest of the wire hogs: Five cables from the fixture including one each for the MH's, One for the T5's, one for the fan, and one for the useless moonlights. The MH cables run to two separate magnetic ballasts each of which has their own power cable running to the my first of three Apex EB8's. Total wires: 7
Apex: Wire from Display Unit to Head unit. Wire from head unit to EB8(1). Wire from EB8(1) to EB8(2). Wire from EB8(2) to EB8(3). Power cables from each EB8 to wall outlets. Probe wires for PH, PH2, and Temp. Total wires: 10.
Powerheads 3xTunze 6095 and one MP40WES. One power cable each for the Tunzes and one cable from MP40 to controller and then from controller to EB8. Total wires: 5
CA Reactor: One cable for feed pump, one cable for circulation pump, one cable for CO2 controller. Total wires 3.
Sump Wires: Skimmer, return pump, pump from sump to fuge, sump recirculation pump. Total wires: 4
So, I have a grand total of 29 cables. If you assume that the average cable length is about six feet, I have at least 174 feet of wire in or around my tank. It's probably quite a bit more since some cables are really long.
That's just too much wire.
I posted there that the wires associated with all of the equipment we use drive me crazy (I also had a bit of fun with poetry). With that in mind, I decided to take an inventory of the number of wires under my tank and what they are attached to. Keep in mind that I'm running a 110 rimless with a sump and separate fuge. I run a calcium reactor, skimmer and a comination MH/T5 fixture. So, starting from the top...
Hamilton Fixture: This is the biggest of the wire hogs: Five cables from the fixture including one each for the MH's, One for the T5's, one for the fan, and one for the useless moonlights. The MH cables run to two separate magnetic ballasts each of which has their own power cable running to the my first of three Apex EB8's. Total wires: 7
Apex: Wire from Display Unit to Head unit. Wire from head unit to EB8(1). Wire from EB8(1) to EB8(2). Wire from EB8(2) to EB8(3). Power cables from each EB8 to wall outlets. Probe wires for PH, PH2, and Temp. Total wires: 10.
Powerheads 3xTunze 6095 and one MP40WES. One power cable each for the Tunzes and one cable from MP40 to controller and then from controller to EB8. Total wires: 5
CA Reactor: One cable for feed pump, one cable for circulation pump, one cable for CO2 controller. Total wires 3.
Sump Wires: Skimmer, return pump, pump from sump to fuge, sump recirculation pump. Total wires: 4
So, I have a grand total of 29 cables. If you assume that the average cable length is about six feet, I have at least 174 feet of wire in or around my tank. It's probably quite a bit more since some cables are really long.
That's just too much wire.