Nano Wavebox

[kross]

I have a standard 90 gallon Tank with Overflow, and been trying to dial in the Frequency. I placed the Nano in the Opposite Corner and been trying to get it to produce a wave and it seems I never see more then 1/4 of an inch displacement on the surface.

It states in the manual turn it up all the way and slowly bring it down till you see the wave, does anyone here have an idea dial wise where thier is sitting?

Also should I place two in the 90 Gallon or is 1 going to be enough?

Thank you

 

[shawnz28]

One thing I will say that many do not realize is just how sensitive the dial is and the ease you can pass up the proper frequency. when you turn the dial id you can see it move you moved it too much at once. If you are getting a 1/4" you are likely close to where you need to be. Try moving it in tiny tiny increments giving at about 60 seconds or so between moves. If the small wave you have dies down move the opposite direction.

 

[kross]

Thank you for the quick reply. I will try that next.

 

[rvitko]

You only need one and a wave of about 3/4" should be possible with just a bit of tuning.