Nanotechnology for Aquarium

D

ddhuyn

New member
Hi,
I am thinking about to apply nano paritals on the surface of inside of the fish tank, which will prevent algeas/bacterial to deposit on the tank. The Nano particals on the surface is so fine which bacteria can not attach on it.

Any of you have any ideas or know any place that makes this kind of tank?

Thanks
Dung
 
Do what?

Sounds like your having trouble putting sentences together...Dung..?

Tippin' grandma's cough syrup flask again?
 
JaredWaites,
so that you dont have to clean algeas on your reef tank. The Nano surface will prevent agleas deposit on your tank.
 
Probably 8 or so years ago someone Id been helping set up tanks mentioned a similar idea; he did some sort of research and had found a method by which you could apply an algae resistant surface to the glass. There were some logistical and cost questions- and to date Ive never heard of anyone actually implementing it.

Im curious though, as I know Nothing about nanotechnology- say the particles applied really are so fine that a bacterium would be unable to adhere itself; wouldnt the bacterium (or perhaps a multicellular algae) just attach itself across several particles, rather than a single larger one?

Sounds like your having trouble putting sentences together...Dung..?
Click to expand...
I dunno- I understood him perfectly well... and considering Dung Huynh is a Vietnamese name, maybe you need to lay off it a bit?
 
Hi Hormigaquatica,
When the Nano particles are so fine to nano meters, the spacing between each particle are about the same dimension. The most bacteria smallest sizes are about .2 to .3 micron meters which are too large compared to Nano meter. The bacterium itself does not have a space to adhere.

I am thinking to apply some commercial Nanotech liquid solution on the my 10G and try out to see if it can be safe for corals and fish.

http://www.youtube.com/watch?v=hDg2d30WVcc
 
Interesting video. I recall seeing something a couple of months back about a Japanese toilet manufacturer doing something similar with their porcelain surface -- essentially nothing would stick to it, and they could maintain a very clean surface with much less flush water volume.

As far as applying this to a reef tank, my concern would be durability -- a scratch or a sand-scoured finish would really suck...

I wonder how this is surface is applied or achieved? I'd think it'd be problematic if the glass had to be treated before assembly -- silicon seams depend on the same micro-roughness that this attempts to eliminate...
 
There is a company in English has made a Nano Glass which does not need additional Nano-liquid to apply on.

If those glass are available, we can use for aquarium. We can remove the Nano layer by sand away the thin layer on the glass so that Silicon can be used.
 
Sounds like a cool idea. If you could get a sample you could put it in your tank and see if anything grows on it.

If it works I need to treat my sandbed!
 
http://nanoshop.open24x7.biz/catalog/index.php?cPath=4

This is what I just bought and will apply on my 30G tank internally.
Fresh water will be added and place the tank on the Sun light for couple days. My point is to see whether ageas will be adhere onto the tank. If it works, I will try with my 10G Salt water with some damsels, then corals if damsels dont show any side of sickness.
 
Sounds like the same stuff you use to treat your car window, might be a good idea to find out what the contents are first.
 
I will do that.

My long term solution is to find glass or arcylic that has HARD coated a layer of Nano-Particles on its surfaces which will assure no comtemination possible to the corals and fishes.
 
that is an awesome video and cool technology. Have you seen the youtube video of the ball with that finish dropped in water? Pretty cool.
 
Silver particles have been used in antibacterial coatings, not sure if it would work for algae.

That nanotec stuff seems more like the stuff used in Rain-X for windshields...
 
I would suggest that you leave at least one face of the tank uncoated. If you see algae growing on the uncoated face but not growing on the coated faces, you'll have a better idea if it works.
 
<a href=showthread.php?s=&postid=13418867#post13418867 target=_blank>Originally posted</a> by DrBegalke
Silver particles have been used in antibacterial coatings, not sure if it would work for algae.

That nanotec stuff seems more like the stuff used in Rain-X for windshields...
Click to expand...

Rain-X is just a silicone product. It repels water and causes glare.
Aquapel is a polymer product. It repels water and does not cause a glare. Neither have anything to do with nanotechnology :)
 
You must log in or register to reply here.

Similar threads

M
AQma AQuarium Log – New Android app for reef keepers
Replies
0
Views
109
magu
M
A
110 Catalina Aquarium Build
Replies
4
Views
498
griss
griss
G
Porifera identification
Replies
5
Views
406
griss
griss
K
Fluval Reef 4.0 LED Nano Power Level for 15G?
Replies
3
Views
218
kingyking888
K
E
Red Sea weir overflow
Replies
9
Views
266
griss
griss
Back
Top