Need AC/DC adapter

[puffster]

Hey everyone,
I am in the need for an AC/DC adapter for a LED strip, after it took a short trip to the floor. I did it while trying to be careful carrying the whole handful back to a safe place after plugging it in and holding over the tank to get a look at the reef with the new strip, clumsy me. :uhoh2: The lights are safe. The adapter has an output of 24vdc @ 2.5 amps. The model number on the back is FY2402500 and is used in multiple applications I.E. lithium battery chargers, laptops and other lighting platforms. Please look in your pile of old electrical misc items and see if you might have one of these. I found some on-line but if I can help out someone clean out their closet, I'd rather do that. Let me know what you find. It still works as a slow pulse strobe for a cool lightning effect.

Thanks,
Ernie

 

[clevebill]

i bought mine from radio shack there around $20

 

[puffster]

I tried Radio Shack, Philcap Electronics, best Buy and Office Max. No luck, the ones I did find were 40, 60 and even up to $80.0O And not a one had the right output. Stores carry demographic material so your Shack might have it and mine will have different stock. But, someone has offered to trade me the adapter t hat I need for a few frags so I should be ok. If it turns out to be the wrong one I can order another from reefbrite. $40.00. Or you could tell me what Radio Shack that was and I could swing in.

Thanks,
Ernie

 

[cmador]

Maybe try eBay

 

[clevebill]

my bad they where 12v adapters i used for my moonlights

 

[Cymonous]

http://www.ledsupply.com/24vdc25a.php?gclid=CJb0m7CcvLkCFSlo7AodxhUAqg

If the connector is wrong, just cut it off and connect the one from the original power supply.

 

[Cymonous]

There is this too, but may be a little harder to attach connector.

http://www.flyteccomputers.com/details.cfm?wid=1469&wb=PS24V-2.5%20&wre=1&catargetid=1809502687&cadevice={device}&gclid=CIq4y_2cvLkCFXRp7AodYVoA3g

 

[nameissoftlover]

19vdc and 3.2 a. Gateway charger.... Will that work?

 

[nameissoftlover]

Picture.. Let me know ernie