Need fuge ideas

joesig

Member
Hello all i need to build a really massive population of pods. Now the cadlights sump has a tiny space for a fuge so I either need a new sump or a external fuge tank next to display tank.
Any ideas? Or sump suggestions the space under tank is about 20"w x 46 long.
Thanks guys.


Sent from my iPhone using Tapatalk
 
My sump doesn't have fug chamber so I did this:
fc8e6cc456ce5f8be58d95d1fe600bf1.jpg
fc8e6cc456ce5f8be58d95d1fe600bf1.jpg

1cbab69ea989e8f65ab4d921cb4b2d35.jpg

5b8974f5d2029ba839410bc2b62714f4.jpg
 
Nice ill have to check it out when i get a frag from you next time


Sent from my iPhone using Tapatalk
 
Jose- can you possible get a photo of the inside of your sump? I have some ideas, but wanted to see what we are working with here :)
 
I cant tell from Mr. Vs pic, but aside from nutrient export I dont think youll want your fuge set up that way. It looks like it drops down into the filter sock, then past the skimmer, etc. Personally I like to drain the fuge directly into the return section. More chance the pods make it back up to the display.
 
This is what I do with the sock. I never a fan of filter sock, but this sump need to have one otherwise it will make terrible noise.
I never have to wash, change it.

e1222875d3dd1a0691e7765e33f85c56.jpg


Better pic of my sump area. It's able to keep my phosphate down to 0.01ppm without any kind of reactor.


44af32afa352581c32bd3b19192745b5.jpg
 
Need fuge ideas

Heres the current setup
I have room to put a small tank on one side of the tank along the wall or redo sump


Sent from my iPhone using Tapatalk
 
What are you trying to feed? Large remote display fuge to the right hand side of your tank is what I would. Split your return to feed the display and fuge and drain it back to the return section. Just make sure your sump can handle the excess and install a siphon break.
 
Then you just need to add some rock or rock rumble in the sump, maybe under the ATS?

Thats what i have now

What are you trying to feed? Large remote display fuge to the right hand side of your tank is what I would. Split your return to feed the display and fuge and drain it back to the return section. Just make sure your sump can handle the excess and install a siphon break.

Thats what i was thinking of doing like a 20g fuge on the side of tank




Sent from my iPhone using Tapatalk
 
Back
Top