New product - flow sensor!!

[AQD_ottawa]

Is the pump still running?

More safety with the new Flow Sensors for ProfiLux!

GHL offers now a flow sensor which can be connected to the ProfiLux aquarium and pond controller, with this sensor the flow can be measured and observed permanently.

ProfiLux can display the actual measured flow and warn with an acoustic signal, or by sending a SMS or an email, when the flow falls below a preset value. If wished ProfiLux can switch devices on or off in case of a flow alarm. The sensors are connected at the level ports of the ProfiLux.

The flow sensors work extremily reliable and need not much maintenance because they work without dirt-sensitive moving parts like winged wheels.

Two different sensors are available:

Flow 100 - 2000 l/h, nominal width DN10, 2x G1/2" outside thread, articlenumber PL-0866, MAP 109,90.- incl. tax
Flow 300 - 5000 l/h, nominal width DN20, 2x G1" outside thread, articlenumber PL-0867, MAP 129,90.- incl. tax

We recommend to use a bypass for higher flows.

Shipment incl. 2m cable Mini-DIN<->M12 to connect the sensor with the ProfiLux. Please note: The sensors are shipped without adapters for hoses or tubes.

These new products are available from April 2012 on, pre-orders are welcome

 

[BigAl2007]

Awesome! I didn't see this post here until after I had posted it over in another forum! Can't wait to see these in action!!

 

[AQD_ottawa]

hope to have pricing later this week!

 

[AQD_ottawa]

please note price shown is Euro but will be cheaper in USA

 

[reefsafe]

I want!!!

 

[moondoggy4]

Nice for a chiller I believe.

 

[reefsafe]

i want it to setup an alarm to let me know if my return pump has failed.

 

[BigAl2007]

i want it to setup an alarm to let me know if my return pump has failed.

I think that's an awesome idea! I've had one fail before while I was gone to the beach. Would have been nice to know before I walked in the door and said, "What's that horrible smell?"

I think this has a LOT of potential.

 

[AQD_ottawa]

it will work exactly as you want it will send an alarm if the flow drops,I am sure the software will also switch the socket off also.

 

[AQD_ottawa]

Many thanks for all your emails today about this great new product!

One important thing about the launch of this product is how it really shows what GHL as a global company can bring to the user. This alone shows that ProfiLux is worth that bit more, not just in quality but also innovation.

The flow sensor that can not only send you flow rates but also shut off a jammed pump is a first, but that's no surprise, GHL ProfiLux is not just a base controller that has an APP but a full aquarium automation system with dedicated accessories. With ProfiLux you do not have to worry about trying to hot wire some third party accessory for limited functionality, GHL supply you all you need in a fast click and go set up.

I truly believe this one product alone makes ProfiLux the global market leader

 

[AQD_ottawa]

OK so here are the prices

Low flow $139.00
High flow $159.00

For a high quality low maintenance German built industrial flow sensor, and with the high importance of now having control over a pump gone bad, this is fantastic value from GHL

We will also be including for free for a limited time this part in all ultimate kits purchased for one month when the product releases in April!

email us at sales@aqua-digital.com for more info

 

[janey]

Michael

I want one , But which one ?? I will be using a
ReeFlo Dart Pump (3600 gph)
i want to pre order

Thanks

JANET

 

[AQD_ottawa]

The largest unit can monitor control up to 5000L an hour so you would have to put a restricted bypass on your dart.

Multiply 3600 into 4.85 will give you your pump through put in litres

PLEASE join the support forum at www.profiluxsupport.com

 

[legaultrm]

Yay, the one feature I have been trying to figure out on my own. Now I don't have to.

 

[wesheltonj]

Who doing the preorders? You are Progressive Reef?

 

[janey]

I don't understand ??? whats 5000L and what do you mean by
puting a restricted bypass on your dart.
\Also i will be having a Ocean Motion attached to to dart output .. ..

PS i tried registering on the http://www.profiluxsupport.com/ and it gives me access denied .??
I emailed contact us about it..

 

[BigAl2007]

I know that Aqua_Digital is taking pre-orders for these now but I'm not sure about PR.

 

[BigAl2007]

The ADMIN over at the support site is looking into it now for you Janey

 

[AQD_ottawa]

http://profiluxsupport.com/showthread.php?78-SPAM-Moderation-and-you!&p=426#post426

here is your answer.