new setup

[gasman059]

I will be plummig and playing with a new 29 nano( and it will mostly be sps) prettu much all equipment in hand xcept for return pump and in sump pump wich most likely be a mag 7. Anyways looking for recomendations for the return pump-
Its a 29 nano cube but it will be on roids lol
two tunzes 6025- sump skimmer (protean system from my friends at AETECH) chiller and MH's.

Help me decide on a return pump.All of you nano freaks may have some greqt suggestions. Thanks in advance.

here's the sump skimmer and fuge all in one.

[/IMG]

 

[ReefWreak]

Drill the 29 for overflows if you know a good, reliable glass shop, before you put water and other crap into the 29 since you're using that sump. If I had a sump and/or overflows on my 24g, I would have put a freakin deltec recirc on there. Anything to clear up the heavy algae buildup in the tank...

Otherwise looks like you've gotten a good start. I'm excited to see where the G-man's reef on 'roids goes.

Merry Christmas Manny

 

[Rogger Castells]

Manny, why don't you use a mid size Eheim and split the output between the skimmer and the return.

 

[gasman059]

<a href=showthread.php?s=&postid=11456677#post11456677 target=_blank>Originally posted</a> by Rogger Castells
Manny, why don't you use a mid size Eheim and split the output between the skimmer and the return.

Roger that was my first idead. need to nail it down.


As far as drilling Eric i don't think that's gonna happen.

 

[REDDAWG43]

Manny you got the new 28g jbj nano cube with the MH hood?

 

[gasman059]

<a href=showthread.php?s=&postid=#post target=_blank>Originally posted</a> by REDDAWG43
Manny you got the new 28g jbj nano cube with the MH hood?

Mel i've had this cube-Oceanic BioCube 29 Gallon for a while - I'm in the process of setting this cube. Today will be the day hopefully to plum it-chill it.
and so forth.
The light is the sunpod hqi MH.

 

[REDDAWG43]

OK......I want to follow this thread closely.
So now in your famous words:

THIS THREAD IS WORHTLESS WITHOUT PICS!!!!

 

[gasman059]

<a href=showthread.php?s=&postid=#post target=_blank>Originally posted</a> by REDDAWG43
OK......I want to follow this thread closely.
So now in your famous words:

THIS THREAD IS WORHTLESS WITHOUT PICS!!!!

Mel I gotta check to see if I can drill the chamber in order to place the little bulkhead.

 

[REDDAWG43]

You should be a too....I have seen quite a few nano cubes drilled.
Everyone explined to me the procress, and it's just like drilling a large tank. Just let the drill bit do all the work...Meaning NO PRESSURE to be put on by you! Let the weight of the drill and the bit alone do the work.

 

[gasman059]

<a href=showthread.php?s=&postid=#post target=_blank>Originally posted</a> by REDDAWG43
You should be a too....I have seen quite a few nano cubes drilled.
Everyone explined to me the procress, and it's just like drilling a large tank. Just let the drill bit do all the work...Meaning NO PRESSURE to be put on by you! Let the weight of the drill and the bit alone do the work.

yup I've done some drillin before but not in a nano lol
will c