New tank setup 210gallon
- Thread starter gabe3d
- Start date
Boviac,
I'm glad i am of use
. LMK if you have any questions, i'll be glad to lend a helping hand.
thanks jesse for the compliment.
Edwin,
Sure you can come over if you want. Just PM me when you want to come over. I still have some pink milli frags i can give away if you want some.
Not that clean if you look at it closely couple of blue and purple.
But yeah i did the plumbing myself. After many replumbing projects and water spillage, you kinda figure out a better way each time around . You don't want to know how much money i spent on just the PVC and pipes for this project....
Gabe
I'm glad i am of use
. LMK if you have any questions, i'll be glad to lend a helping hand. thanks jesse for the compliment.
Edwin,
Sure you can come over if you want. Just PM me when you want to come over. I still have some pink milli frags i can give away if you want some.
Not that clean if you look at it closely couple of blue and purple.
But yeah i did the plumbing myself. After many replumbing projects and water spillage, you kinda figure out a better way each time around . You don't want to know how much money i spent on just the PVC and pipes for this project....Gabe
WOW!!! I'd love to be able to come check it out too... I live in Elk Grove and can come over whenever it's convenient for you. I'm picking up a 180 this weekend and can only hope to get it half as clean yours. Did the tank come drilled? I'd like to be able to drill the 180 from the bottom also but I hear that most tanks are tempered on the bottom.
Ryan
ps. I'd love a piece of that pink milli if you still have one not spoken for...
Ryan
ps. I'd love a piece of that pink milli if you still have one not spoken for...
nasotang
New member
Very Nice tank and set-up. I'm actually getting a 210 AGA in roughly a month, so I'm glad I found your thread.
It looks like you're not using the returns in the overflow...is the return to the tank going through the 4-way? What pumps did you decide to use for your set-up?
How are your SPS doing under the 250W with the added depth of the 210?
It looks like you're not using the returns in the overflow...is the return to the tank going through the 4-way? What pumps did you decide to use for your set-up?
How are your SPS doing under the 250W with the added depth of the 210?
Thanks, i hope this thread is of use to you. Though i don't have many pics and much info on my setup, hehe.
Not anymore, i initially set it up that way because i needed to transfer my livestock as fast as possible. With the new plumbing, which is not yet completed, the return will be fed back to the tank through a WavySea. The closed loop which is ran via the Hammerhead is feeding the 4way.
I have two pumps in my system.
Dart: Return on WavySea. Feeds water to UV, Phosban Reactors, Chiller, Calcium Reactor
Hammerhead: Closed Loop on OceansMotions 4way.
Hard to quantify how well the SPS are doing under the 250 but, they are growing and i have yet to lose any.
Last edited:
jtemple42000
Premium Member
I am going to be starting my install of a 210 AGA next week.
Sounds like you are using only the two drilled drains? They provide enough water for both pumps?
Sounds like you are using only the two drilled drains? They provide enough water for both pumps?
Yes, I did some calculations to see if it can and it does turn out ok. To very my calculation's correctness i did a lot experimenting with different pumps and drain holes. After all of this i was confident that the 4 holes provided by AGA will be enough to naturally feed both my pumps, Dart and Hammerhead.
