breutus
Don't ask me, I'm wrong.
okay the new tank has not been set up long so I might just be overreacting. But I thought going to this set up I was going to reduce my nitrate issue alot more than I have.
I wonder if these could be my issue still
http://www.drsfostersmith.com/produ...ategoryimages/larger/lg_27246_36844D_fish.jpg
I had a lot of this type of media in my old filter, and to help seed the new tank I put a bunch of this old media in the first spot in my sump where the water comes in, thinking it would be beneficial. Is it supplying the nitrate problem. Are they just nitrate factories on each one?
I only have a big handful of cheato in the sump. There is plenty of room for more, do I need more? If my lighting is on the lower side in my sump will that cause part of the problem.
I have a 72g BF with a 30g sump, about ten pounds of live rock rubble in the sump along with about 5 and a half inches of live sand and the cheato. In the main tank is about 80 to a 100 pounds of live rock, and a three inch live sand bed. I get a pretty decent skim on my skimmer.
But I am still at about 20 PPM on nitrates!!!
Sorry for the long post but I was sure somebody here would be able to give me some advice!
I wonder if these could be my issue still
http://www.drsfostersmith.com/produ...ategoryimages/larger/lg_27246_36844D_fish.jpg
I had a lot of this type of media in my old filter, and to help seed the new tank I put a bunch of this old media in the first spot in my sump where the water comes in, thinking it would be beneficial. Is it supplying the nitrate problem. Are they just nitrate factories on each one?
I only have a big handful of cheato in the sump. There is plenty of room for more, do I need more? If my lighting is on the lower side in my sump will that cause part of the problem.
I have a 72g BF with a 30g sump, about ten pounds of live rock rubble in the sump along with about 5 and a half inches of live sand and the cheato. In the main tank is about 80 to a 100 pounds of live rock, and a three inch live sand bed. I get a pretty decent skim on my skimmer.
But I am still at about 20 PPM on nitrates!!!
Sorry for the long post but I was sure somebody here would be able to give me some advice!