reefinsocal
Member
So after having the BC 14 for approx 2 months I noticed the surface skimming was really not up to par if any at all. So the guys at Nanotuners.com let me use one of these to test out.
http://www.nanotuners.com/product_info.php?products_id=247
First I removed the false bottom of chamber 1
Next I used a tall piece of black ABS plastic and Super Glue Gel to cover the bottom intake grate of chamber 1
Next, I snipped the small molded plastic piece in the top right corner by the intake grate.
Then I widend the overflow from chamber 1 to chamber 2 approx by an additional 1/2"
Finally attached the Nanoskim and WALLAH!!!!
Hope this can help other out!!
http://www.nanotuners.com/product_info.php?products_id=247
First I removed the false bottom of chamber 1
Next I used a tall piece of black ABS plastic and Super Glue Gel to cover the bottom intake grate of chamber 1
Next, I snipped the small molded plastic piece in the top right corner by the intake grate.
Then I widend the overflow from chamber 1 to chamber 2 approx by an additional 1/2"
Finally attached the Nanoskim and WALLAH!!!!
Hope this can help other out!!
Last edited:
