Online manual for the 7094 multicontroller

[pedalpower]

I can't find my manual for my multicontroller and I'm having some difficulties with it. Is there an online manual?

Thanks!

 

[rvitko]

Pm me an email address and I will email you a PDF- it is 500mb so you will want high speed internet. I will get to it by noon tomorrow.

 

[pedalpower]

I'm going to have to find someone with high speed internet. But in the mean time what setting do you recommend for my tank (90 gal. RR with 2 7400s). Right now I have it set to tide mode (last option on switch) with the pumps plugged into channel 1, interval switch set to 1 - 7 min, interval dial set max, and pulse set to max.

Questions:
When do the pumps go into night time mode? Is it immediately after the sensor detects a light change? Does it continue in this mode until the light goes on? Can this activity be seen by a dimming of the pump indicator lights?

 

[rvitko]

I would use pulse mode as 2 pumps running is not too much for your tank. I would set channel 1 for 30%/100% and channel 2 to 100%/30%.. Set pulse to 3 sec (center). At night mode both pumps switch to the lower setting for the duration of night so in this case one pump will be doing 30% and one will do 100%. The flow will be more static but you really don't want it to slow as pH drops at night and this will help prevent that.

 

[pedalpower]

Thanks!