Optimize stream placement in 125g

[prop-frags]

I have two 6100 streams in my 125g (72x18x22) reef tank.
Here is an approximate scale drawing:

Right now, I have pumps placed (using the magnetic brackets) at (2) and (4) both pointing at (A).
I am not currently using a controller (waiting on the 7095 to arrive), but instead have both pumps on constantly turned all the way down (30%?).
Question, outside of rock placement and obstacle considerations, what are some optimal ways to place streams to maximize chaotic flow within my tank? How about once I get my controller?

 

[rvitko]

I would prefer 1 and 3 and aimed about 1ft before A. It would be better to run one at a time and pulse them between say 30% and 50% since the pulsing really helps disperse the flow.

 

[prop-frags]

Thank you, Roger.
Are you still thinking end of Nov for the 7095?

 

[rvitko]

Yes, I am pretty sure it will be ready then.

 

[prop-frags]

I would prefer 1 and 3 and aimed about 1ft before A. It would be better to run one at a time and pulse them between say 30% and 50% since the pulsing really helps disperse the flow.

I understand the placement, I'll try that. On the pulsing, is that something I'll understand once I have the controller? Is there a manual I can look at ahead of time?

 

[prop-frags]

Update:
I tried this evening to place the 6100s at (1) and (3), aiming short of center (A) by about a foot. This is not possible with the magnetic mounting brackets. That bracket does not allow the stream to be rotated far enough over.

 

[rvitko]

The farthest the pump can be rotated to one side should be sufficient. I don't yet have a copy of the final manual for the 7095 but it is much more understandable than the 7094.