Osmolator 3155 packed it in... After 10 years

tgunn

Active member
I wanted to give a huge kudos to Tunze. My Osmolator 3155 just packed it in after around 7 years of flawless service. This is pretty much the only piece of equipment that I've never had to replace or worry about throughout the years.

It seems it's the optical sensor as k the high level shutoff float works, and the pump runs when I unplug and replug the unit.

Again, kudos. I'll definitely buy another.
 
I would be happy to take a look at it, it is possible it just needs a new sensor or the pump is bad.
 
I would be happy to take a look at it, it is possible it just needs a new sensor or the pump is bad.


The pump still works. If you'd like to take a look that's fine with me. Let me know where to send it and I'll package it up.

Thanks!
 
Tunze USA
2121 Cole Springs Rd
Buda TX 78610

If we can't fix it, I will discount a replacement.
 
Last edited:
Thanks again Roger. I shipped this out the other day. Really appreciate you taking a look.
 
10 years and the pump still works? Roger told me they only have like 3 years life if used with Ro/di water only and 1-2 years if run with Kalk. :); Mine did run 3 years and still going (the pump)
 
The life varies greatly, it is a brush motor with an o ring seal between the shaft and motor, the seal failing is what kills them and a lot depends on the cleanliness of the water, any additives, quality of the seal and shaft, etc.
 
Back
Top