Overflow Noise Issues

[kita_katan]

I have a question about noise reduction for my overflow. I have a 60 gallon with a corner overflow and currently there is only a stand pipe in it and it is very noisy. What do you guys think about the Durso Standpipes? Does anyone use this method or any suggestions to quiet the overflow issue? Any help would be great!

 

[Coelli]

A durso will quiet it down quite a bit though the sump will be louder, especially if (like me) you don't run socks. It will still be quieter than a straight standpipe though. You can also put a gate valve on the drain instead of the durso but it's risky and you'll find yourself having to constantly adjust it. And by constantly I mean daily if not multiple times a day!

 

[Rippinfrags]

I also would recommend a durso stand pipe or a herbie if you have limited room. I firmly believe in the use of a gate valve after your return pump. This will eliminate all gurgling noises because you can match the amunt of flow that is draining into your sump.

 

[kita_katan]

Here are some pictures

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

 

[Tschupe]

http://gmacreef.com/herbie-overflow-reef-tank-plumbing-method-basics/

 

[TangingOut]

I had the same issue and I put in a taller stand pipe and installed a Maggie muffler. Not silent, but a lot more quiet.

 

[AZBigJohn]

I used Durso pipes in an area that small. I actually have 2 corner overflows, so I did them in both, but is is doable in that small space...

It is a lot quieter, and adjusting the amount of air in through the air vent in top seems to be the key to keeping it quiet.

 

[drtrash]

Tried the durso but could not get it to work very well, Heriberto with gatevavle works flawlessly and silent. Rare adj if you have true herbie with main and safety drain

 

[azjohnny]

If you only have a single pipe the easiest solution is a Maggie Muffler, it will reduce a lot of noise. Its not as effective as a Herbie but is close

http://www.aquacave.com/aquarium-plumbing/maggie-mufflers.html

 

[Monchompa]

If your getting a water gurgle.. I just stuck a filter sponge on the top of mine, seems pretty quite to me. Just make sure its not directly on top of it and make sure not to block the flow.

These guys:
http://www.bulkreefsupply.com/minimax-media-reactor-sponge-4-pack-innovative-marine.html

 

[swishb]

I use the stock man pipe you can look it up on you tube .

 

[Rippinfrags]

If your getting a water gurgle.. I just stuck a filter sponge on the top of mine, seems pretty quite to me. Just make sure its not directly on top of it and make sure not to block the flow.

These guys:
http://www.bulkreefsupply.com/minimax-media-reactor-sponge-4-pack-innovative-marine.html

Your method has me concerned. If the filter sponge clogs with debris of any kind your return pump will feed more water in your tank than your drain can handle and you will have quite the mess on your hands. I would rethink your design.

 

[Monchompa]

Your method has me concerned. If the filter sponge clogs with debris of any kind your return pump will feed more water in your tank than your drain can handle and you will have quite the mess on your hands. I would rethink your design.

As long as you are smart about it its fine Mine is positioned in a way that its impossible. for his I would recommend laying a frag grate over the top that way its impossible for the foam to touch the pipe. I Won't be rethinking my tank design. Thanks.

 

[Rippinfrags]

Sorry monchompa I didn't mean to come off as rude. I was just trying to save you a potential headache. My own tank setup concerns me as well because I do not have an emergency backup drain setup. There is always a possibility of a drain clogging. With so many variables in this hobby you always have to be prepared for the worst.

 

[Monchompa]

All good rippinfrags, while your right, your idea is the right choice. there are other ways to silence it in the meantime.

 

[drtrash]

Murphy's law with aquariums is crazy accurate, re think design now and prevent flood when you are out of town and friend is watching tank....

 

[joaocdestro]

I've created a 50mm pipe overflow, very cheap and extreme quiet!!!
*better than my noisy manufactured Skimz Overflow

https://youtu.be/S6sUMp-D5jY