Ozonizer in SPS only tank
- Thread starter Jar*Head
- Start date
I have a Ozotech 200mg and works great with my PM Venturi style skimmer. The light penetration and clarity was the most noticable improvments I seen.
It also does not run that much once it cleans up the place it seems, I also got a air flow meter and DI Dryer (I would get the electronic dryer if you can) that makes tunning the skimmer very easy.
Nice results so far.......
P.S. I ran the unit without the dryer and it worked fine for a while, but Ozotech told me it could create some unwanted toxins on the corona if to much moister got to it so I planned on getting some dryer latter on.
It also does not run that much once it cleans up the place it seems, I also got a air flow meter and DI Dryer (I would get the electronic dryer if you can) that makes tunning the skimmer very easy.
Nice results so far.......
P.S. I ran the unit without the dryer and it worked fine for a while, but Ozotech told me it could create some unwanted toxins on the corona if to much moister got to it so I planned on getting some dryer latter on.
Thanks for the info. I am saving up for the 200Mg OzoneTech, Electronic air Dryer, MTC PRO240 ozone reactor, CAF (carbon air filter) and SF7 which is the carbon filter for the effluent. As for the OPR controller, i will go with either american pintpoint or Milwauke (Pintpoint more than likely ) i am not going to run it off my skimmer cuz it will cost a lot to replace my RD pump if something go wrong or the Ozone did some damage to the pump
You must have been reading up, that is a good measure to ensure if you use your skimmer with ozone that the air injection occurs after the pump rather then before 
I just got off the phone with Ozotech and the tech guy there said that you can run the unit without a dryer but it could cause nitric acid (Not sure about the spelling) to build up and my get into your tank if gravity would allow. In my cause the generater is below the feed line so no worries there.
Good luck......
I just got off the phone with Ozotech and the tech guy there said that you can run the unit without a dryer but it could cause nitric acid (Not sure about the spelling) to build up and my get into your tank if gravity would allow. In my cause the generater is below the feed line so no worries there.
Good luck......
<a href=showthread.php?s=&postid=10172871#post10172871 target=_blank>Originally posted</a> by sditch
You must have been reading up, that is a good measure to ensure if you use your skimmer with ozone that the air injection occurs after the pump rather then before
I just got off the phone with Ozotech and the tech guy there said that you can run the unit without a dryer but it could cause nitric acid (Not sure about the spelling) to build up and my get into your tank if gravity would allow. In my cause the generater is below the feed line so no worries there.
Good luck......
I know the electronic air dryer will cost a bit $$$. but i would like to keep it safe
a dryer but it could cause nitric acid
As I said in my other post it is nitric acid. The ozone reacts with moisture and nitrogen gas in the ambient air producing nitric acid. If it makes it to the tank it just gets converted to Nitrate. It is really not an issue for the tank but the acid can damage internal parts of the ozonizer. If one used any metal fittings in the air line to the reactor/skimmer it will eat them up.
As I said in my other post it is nitric acid. The ozone reacts with moisture and nitrogen gas in the ambient air producing nitric acid. If it makes it to the tank it just gets converted to Nitrate. It is really not an issue for the tank but the acid can damage internal parts of the ozonizer. If one used any metal fittings in the air line to the reactor/skimmer it will eat them up.
hehehehe, thanks Boomer. I just want to be safe and make sure my equipments last longer, effective, and keep my live stock healhty. Uncle Sam didn't pay me much but i can cut down on beer money, lunch money and may be sell a few frags, no more fancy dinner on saturday night
I like top notch equipments.
OK and one final note
You are you are buying Ozotech and NOT a Ozonetech which is another beast and even more expensive
http://www.ozotech.com/
http://www.ozonetech.com/
You are you are buying Ozotech and NOT a Ozonetech which is another beast and even more expensive
http://www.ozotech.com/
http://www.ozonetech.com/
Yes sir, Ozotech. Ozonetech made in sweden, too far, too expensive. If something go wrong with the shipment or the generator i don't want to sit here and waiting, and waiting for the replacement. I don't want to call sweden to argue about the product or asking for help. Esp, i don't know which language they will be speaking. I can barely speak english
Similar threads
