Photon 48 Lighting Setting

blando233

New member
Hey guys,

I am trying to come up with a good lighting setting with my photon 48. Does anyone have this and could give me some ideas?

Thanks!!
 
mee too!:wave: i have a couple of zoa colonies and a hammer that is goin transparent. so i set the lights at 35b 15w for 6 hour peak with 3 hour ramp up and down. starting low but dont know if hammer was getting to much or not enough, sooo confused
 
It really helps if you tell us how deep your tank is? Shallow needs less and deep needs more.

I use EverGrow fixtures (they make the ReefBreeders fixtures) that are just a 32" version of your 48" fixture. After acclimating, I do a 5 hour sunrise, 3 hour midday at 90% blue and 40% white, and a 6 hour sunset. The sunrise and sunset just go up and down it increments of 10% white and 15% blue (roughly) every hour.

I have a mixed reef with a lot of sps and some lps and softies and using these leds for 32 months now.

 
It is a 75 gallon tank. Today i been working on it and since i was going to start off i thought about just gradually increase the light every week or every other week. This is what i have so far let me know what you think.
 

Attachments

  • Settings.jpg
    Settings.jpg
    10.6 KB · Views: 6
I run my Photon 24 on my 40 gallon breeder frag tank @ 65% for both channels max. PAR reading on the sand is 225
 
Back
Top