Please check my doser settings

[Baldwin]

So alk and calcium doses 24 hours a day then? The calcium doses around 15 after the alk? That sounds like a good regimen I really appreciate the help!

 

[Baldwin]

So you are getting about 2 drops every 30 minutes this way for 24 hours. How do you mathmatically get that it is around 60 ml because it seems like closer to 48-50?

 

[Baldwin]

Ok I see now 1.1 per minute x 48 equals 52.8 and I guess the extra 15 seconds would add a couple of ml to that. Great!

 

[SPotter]

it does work out to be a little more than 60 ml's per day on mine but that gives me a little buffer if one of the lines gets a little clogged.

 

[Baldwin]

reat, I just turned them on with your codes so the alk just ran 115, so I should wait 1645 to see if the cal works right?

 

[SPotter]

correct. if you check your graphs to show just the alk and ca pumps you will be able to see when they turn on and off.

 

[Baldwin]

How do you do that just by looking at the amps?

 

[SPotter]

Does your graph page look like this?
It's not the greatest picture but if you look in the bottom left of my picture you will see where I have the two boxes checked off.

Sent from my iPhone using Tapatalk

 

[Baldwin]

No my raph pae just has 2 bar graphs one for amps and one for temp and one for pH how do you get those check boxes?

 

[SPotter]

sounds like you are running the old firmware. you need to update your firmware and you will be able to see the same options for graphing. how old is your apex?

 

[Baldwin]

2 years or so, Im not sure how to update the firmware any suestions?

 

[SPotter]

I would bookmark this link and if possible, print it out, bind it and keep it right by your tank. This is the user manual for the apex and its priceless!

http://www.neptunesys.com/APEX-20104032_WEB.pdf

 

[Baldwin]

unfortunately I cannot open that file. Dont have the correct program, do I have to ggo to their site to update or somethingg>

 

[SPotter]

go to the top of the neptune forum and there is a thread with the link to the user guide. you can find the user guide if you go directly to neptunes website and click on support.