Please help me with my DC8 Layout?

[rgonzalez]

So here is the output of my DC8:

LT1 ON
LT2 ON
PM1 ON
PM2 OFF
HET OFF
COL UNK
OZN ON
CO2 OFF
ALM ON

My question is, which socket goes to which LT1, LT2, etc?

If I am looking over-top the unit, I see 4 sockets on the top row and 4 directly underneath. I've attached some pictures of the sticker on the side which might help?

 

[KMP]

You have to name the sockets first; then program them (one at a time) to do what you want. Its easier if you write it down on paper. If only using the one DC8 then your dip switches and to know which is 1-4 look at the front of the DC8 and make sure the "15" (fuse) is on the top right side.

Example of 'Timer Names"

LT1 - A01
LT2 - A02
PM1 - A03
PM2 - A04
HET - A05
COL - A06
OZN - A07
CO2 - A08

Also, you don't want to put anything with a lot of draw on socket 4 & 8.

 

[rgonzalez]

In my first posting I have a picture of the dip settings. Here is a picture of the unit when looking at it top-down.

Are you saying that LT1 is the socket directly to the left of the white "15" button?

 

[KMP]

Directly to the left of the "15" is A01. So your outlets would be:

A01 - A02 - A03 - A04
A05 - A06 - A07 - A08

As you look top/down. You have to set timer names before you can set timer programs. If you name A01 - LT1 then, yes, that would be your first outlet (immediately to the left of the "15")