Plumber work for coral :)

[rogergolf66]

Mods if not allowed to post this then I apologize. I always post on topic so don't know if this is allowed. I bought a new shower head but unfortunately it's not as easy as unscrew old one and screw new one in. There r no threads to screw the new one into and it's copper pipe. I don't trust my self to add a fitting to copper. If it was PVC I would be all over it. Will pay or trade for corals

 

[CuzzA]

Sweating pipe is really easy. A simple search on YouTube will provide you with the instructions. All you need is a torch and a pipe sweating kit that consists of emery paper, solder and flux and of course the fitting(s). If you have any questions I'd be happy to help. Don't let the sound of sweating pipe intimidate you.

 

[Travis1787]

Shark bite fittings Roger ... you can get them at home depot

 

[rogergolf66]

Ok I will do some searching see if I'm willing to give it a shot

 

[snake1]

They sell torch kits at HD for about $20.00 just buy the yellow bottle don't listen to the idiots there that will tell you to buy the blue bottle, the plumbers on my job laughed when I told them it took 10 minutes to finally heat up the solder to melt it.....make sure your joints are really clean and flux both sides of your connections.....I.e. The male outside and the female inside ......if you need help i have done it before.

 

[risin]

Shark bite fittings Roger ... you can get them at home depot

Agreed. I was skeptical at first, but the shark bites work great. All you need is a cheap pipe cleaner for prep.

 

[Easttuth]

Shark bite fittings Roger ... you can get them at home depot

Yup

 

[Nor_Cal_Guy]

They sell torch kits at HD for about $20.00 just buy the yellow bottle don't listen to the idiots there that will tell you to buy the blue bottle, the plumbers on my job laughed when I told them it took 10 minutes to finally heat up the solder to melt it.....make sure your joints are really clean and flux both sides of your connections.....I.e. The male outside and the female inside ......if you need help i have done it before.

+1 on the yellow bottle-Mapp gas. The bigger the torch tip, the bigger the flame, the faster the brazen