Power bar inversion

[Stalactite]

Ok i got my profilux talking and it feel so good:rollface: :rollface:

Now i seem to have inverted the S1-S4 programing. I did those for the dosing pump at it works great.
So i pluged the power bar S5-S8 can i do that ? Now however the power bar doesn't work, and i'm not sure if its because i inverted the connection or if its my power bar programing thats not good. If it doesn't matter wich order i chose to put the dosing pump and the power bar please tell. Other wise all that work for the pump i got to erase and star over

If its ok, can you walkthrough the power bar connection process thanks. Got the rest to work great, temp, PH, level.

 

[AQD_ottawa]

Hi

As I said before, no you can not plug the power bar into S5S8. This is also covered in section 3.16.21 of the manual and also on the warning sheet.

In the email i sent you I gave you step by step power bar set up. If you have wrongly programmed S1S4 then follow my steps to re program

Hope that helps, if not then please go to www.aquariumcomputer.com/forum for further assistance.



IMPORTANT LINK FOR THE GHL COMMUNITY

 

[Stalactite]

<a href=showthread.php?s=&postid=15548863#post15548863 target=_blank>Originally posted</a> by AQD_ottawa
Hi

As I said before, no you can not plug the power bar into S5S8. This is also covered in section 3.16.21 of the manual and also on the warning sheet.

In the email i sent you I gave you step by step power bar set up. If you have wrongly programmed S1S4 then follow my steps to re program

Hope that helps, if not then please go to www.aquariumcomputer.com/forum for further assistance.



IMPORTANT LINK FOR THE GHL COMMUNITY

Ok thanks . The power bar works great

Good morning!
After my 5 hours sleep, i couldn't any more i had to see the profilux in action;

My halogen shut off on time 7am.

The fans where running the temp had reach 80.5 and was in the cooling zone i had put the program for it and at 82 the light would shut of totally regardless.

The heater stoped when temp reached 80 oF.

The probes are working fine, PH at 7.94 need to go up , but empty tank.The temp is cooling down to 80.1, so the fans seem to work good in the fuge.

The Halogen was programed from 10 pm to 1 am shut off from 1 am to 4 am and then on again from 4 am to 7 am.

I have the clamp on lamp running from 10 pm till 7am on a seperate timer to keep the ph on the go from the fuge.

As i write this the fans just stoped, the temp came down to nominal , it took an hour only.

Now my T 5 just came on, , cool man...

 

[AQD_ottawa]

5 hours of sleep would of been great after 13 hours international travel last night but back to the mix today

Really pleased you are figuring things out, this i great news

 

[Stalactite]

<a href=showthread.php?s=&postid=15548903#post15548903 target=_blank>Originally posted</a> by AQD_ottawa
5 hours of sleep would of been great after 13 hours international travel last night but back to the mix today

Really pleased you are figuring things out, this i great news

Thank, ya i'm getting smarter LOL.