Powered by Tunze!

[Nuuze]

I received an item today from a trade.

I always hesitated on waveboxes in the past. But this time I decided a try. I traded another RC'er for his 6212 wavebox.

After a quick vineger bath, rinse and wipe up, it was ready to go into the tank for it's first run. Not coming with instructions I quickly find it on Tunze site. Starting with the pump on high and frequency fast I start to turn the frequency dial just a bit every few minutes. Pretty quickly I find the sweet spot! It only came with one set of Tunze magnets so I temporary have Mag-Floats on the outside. Still deciding if I want to keep it where it's at on the back left or the right front to keep the left side clear & viewable. Here's the wave I got after 5 minutes of adjustment. Enjoy!

Wavebox 6212


Wavebox 6212 with 6105


6091


More videos in my thread here:
http://reefcentral.com/forums/showthread.php?postid=13602860#post13602860

 

[Nuuze]

Would adding a 7095 and a pump or two interfere with the wavebox/6091? Is there any special connections I need to do between the two controllers?

 

[Jar*Head]

Adding the multicontroller will not interfere with your wavebox. You can connect the two controller and change your jumper into external. But i don't recommend ....

 

[Nuuze]

Thank you Steve. I'll keep them seperate.

 

[kdblove_99]

Thats awesome Mike!

 

[Nuuze]

Thanks kdblove!

I played around with it a bit more. Once I found the sweet spot I had to turn it down to a 1/3 or else I would have waved out of tank. On high there some sounds but at 1/3 it's complete silent.