PRECISION MARINE Professional Kalk Reactor KR620
Using Kalk is easy and cheap compared to always buying two part additives and don't have to worry about dosing!
At Precision Marine there are two ways Calcium can be added to your reef tank, the Calcium Reactor or the Kalkreactor pictured here. You can either gravity feed through the Kalkreactor from a freshwater top-off system to your reservoir, or use a dosing pump.
We chose a reliable water pump in lieu of the magnetic stir bar, which tends to jam, bind and wear the acrylic.
The KR620 also includes a drain valve to lower the water level to enable adding Kalk powder through the threaded opening at the top. This can be accomplished without removing the lid. Master fabricated and computer cut, the KR620 is a very nice piece of equipment.
Overall Height - 15.5"Footprint - 7.75"Included Water Pump - Maxijet 400Reaction Tube Diameter - 6"Water Inlet/Outlet Size/Type - " Speed-fittings w/Polyethylene tubing includedMethod of feeding - Gravity or PressureIntegrated Drain ValveCapacity - Unlimited capacity. Effectiveness is based on evaporative rate
