FirstContact
Active member
Still trying to get my ATO to turn on in advanced mode. (The Tunze box lights up when the outlet is assigned as a Pump but not in Advanced mode with the coding below.) Is this because the Kalkreactor outlet is always considered "On"? What needs to be changed.
Thanks a bunch,
ATO (Outlet #8)
Fallback Off
Set On
If Outlet Light1_3_1
= On Then Off
If Outlet Kalk_1_3_4
= On Then Off
If pH > 8.06
Then Off
Defer 030:00
Then On
Kalreactor (Outlet #4)
Fallback Off
OSC 000:00/000:10/239:50
Then On
Thanks a bunch,
ATO (Outlet #8)
Fallback Off
Set On
If Outlet Light1_3_1
= On Then Off
If Outlet Kalk_1_3_4
= On Then Off
If pH > 8.06
Then Off
Defer 030:00
Then On
Kalreactor (Outlet #4)
Fallback Off
OSC 000:00/000:10/239:50
Then On
