Psxerholic
New member
Shortening the feet
That fits now perfect.
That fits now perfect.
PSXerholic's 210 New Reef build
- Thread starter Psxerholic
- Start date
Psxerholic
New member
Plenty of room when I will work on the tank.
Position at the back
Position of the fixture at the front. Won't happen at this tank.
But allows access to the backside to remove plumbing in the overflows.
Position at the back
Position of the fixture at the front. Won't happen at this tank.
But allows access to the backside to remove plumbing in the overflows.
Psxerholic
New member
All right, ready for a test of the lights.
Whooooooooooooooooooo.....
nice lighting.
HQI only
Whooooooooooooooooooo.....
nice lighting.
HQI only
Psxerholic
New member
Here is was really lucky. that nothing collides
And a side view
And a side view
Psxerholic
New member
Front view
Psxerholic
New member
Top view with the fixture in the back, in real life it looks more spaceous.
Psxerholic
New member
So in the meantime I started working on some thoughts for the frame.
Specially Power systems and arrangement.
My power distribution
Some first thoughts regarding the arrangements.
Specially Power systems and arrangement.
My power distribution
Some first thoughts regarding the arrangements.
Psxerholic
New member
The current RKL in the 105 system.
Psxerholic
New member
RELOCATION OF THE TANKS
In order to do the next steps, I have to remove the old tank into a temporary location since the new system shall replace the old one.
Here I'm preparing a big 30g bucket for corals etc.
Sanitizing the new thing with clorinated water. then flush with RODI
I'm starting with my lil farming tank, that need to be moved away first.
The lil farming tank was connected via bypass to the other system.
In order to do the next steps, I have to remove the old tank into a temporary location since the new system shall replace the old one.
Here I'm preparing a big 30g bucket for corals etc.
Sanitizing the new thing with clorinated water. then flush with RODI
I'm starting with my lil farming tank, that need to be moved away first.
The lil farming tank was connected via bypass to the other system.
Psxerholic
New member
I will have some losses due to the stress, so I'm hoping some will make it.
Taking the water out.
All right, the tank is being moved over.
Taking the water out.
All right, the tank is being moved over.
Psxerholic
New member
Cut out for cabling and Top Off Water from the laundry
Also I started doing the RODI Water for the first fill.
Also I started doing the RODI Water for the first fill.
Psxerholic
New member
TDS is zero!
Thats good.
The Relocation started. Preping the tank for moving.
Final cleanup of the tank with some special mobs, borrowed from the wife's steamer.
Works great
Preparing the lift, so I can roll out the arrangement.
These self made roller do a good job.
They are the same as at the begining of the thread.
Rollin...............
Thats good.
The Relocation started. Preping the tank for moving.
Final cleanup of the tank with some special mobs, borrowed from the wife's steamer.
Works great
Preparing the lift, so I can roll out the arrangement.
These self made roller do a good job.
They are the same as at the begining of the thread.
Rollin...............
Psxerholic
New member
Rolling the beast around the house
Challenging steps, but we made it.
Done, reached the door.
Now the tank is becoming a temporary tank for relocating the old 105 system.
Challenging steps, but we made it.
Done, reached the door.
Now the tank is becoming a temporary tank for relocating the old 105 system.
Psxerholic
New member
Important to drain the double wall chamber in the overflows.
Then I do a temporary pipeline in the house.
Using a new MAG9.5 for bringing the water over.
Then I do a temporary pipeline in the house.
Using a new MAG9.5 for bringing the water over.
Psxerholic
New member
There you go.
All the livestock has been brought over.
A heater and the BIOPELLET reactor will work for a while.
The 105 is nearly empty.
I will keep some Water above the sand, just to keep the dying micro live low.
All the livestock has been brought over.
A heater and the BIOPELLET reactor will work for a while.
The 105 is nearly empty.
I will keep some Water above the sand, just to keep the dying micro live low.
Psxerholic
New member
So this step is important.
I will take over the Refugium and the remote DSB alive.
So I will lower the Waterlevel and did slide out the Refugium.
Then the 105 tank need to go over asap in order to get the Refugium back running.
Here are some pictures during the smoke break.
The Refugium in sliding condition.
The 105 tank is in a temporary place as well.
The entire house looks and smells like a bloody fishstore.
Refugium back in.
Now quickly fillin up the water and get the stuff back running.
Worked late hours these days.
Here is the pipeline #2
I will take over the Refugium and the remote DSB alive.
So I will lower the Waterlevel and did slide out the Refugium.
Then the 105 tank need to go over asap in order to get the Refugium back running.
Here are some pictures during the smoke break.
The Refugium in sliding condition.
The 105 tank is in a temporary place as well.
The entire house looks and smells like a bloody fishstore.
Refugium back in.
Now quickly fillin up the water and get the stuff back running.
Worked late hours these days.
Here is the pipeline #2
Psxerholic
New member
This is how to get even to lowest water out of the tank by using an elbow as a suction pipe.
OK, step completed.
Relocation done.
OK, step completed.
Relocation done.
Psxerholic
New member
Next morning, the 105 cleared up and I can get the 210 into its intended spot.
Roll it over to find the right location to mark and cut the carpet out.
Carpet out.
My 3 Power plugs and the ATO hose.
Tank in place
I had so far 30G of RODI Water.
The fillup started.
Using the MAG9.5 and my pipeline design, lol.
Then I put as much onto the tank as I have it.
The canopy is in 2 pieces and each one can get carried around easily
Then the light fixture
Cable run very nicely
Roll it over to find the right location to mark and cut the carpet out.
Carpet out.
My 3 Power plugs and the ATO hose.
Tank in place
I had so far 30G of RODI Water.
The fillup started.
Using the MAG9.5 and my pipeline design, lol.
Then I put as much onto the tank as I have it.
The canopy is in 2 pieces and each one can get carried around easily
Then the light fixture
Cable run very nicely
Psxerholic
New member
The cables for later wiring.
Not plugged in yet.
Cant wait to get it filled up.
I'm doing RODI and checking the TDS all the time.
TDS is always 000.
Putting some salt in, to get the Sand in next day.
Not plugged in yet.
Cant wait to get it filled up.
I'm doing RODI and checking the TDS all the time.
TDS is always 000.
Putting some salt in, to get the Sand in next day.
Psxerholic
New member
Next day,
another 30 G Water and the Livesand bags.
another 30 G Water and the Livesand bags.
