znotch
New member
Hey everyone, so I have spent the past 6 months trying to lower the phosphates in my tank using regular BRS GFO in a BRS single reactor. When I set up my latest tank, I mixed approximately 80 lbs of dry rock (that had been cured for about two months) to my established 75 lbs of rock. As of Sunday, I'm getting a reading of 0.18 on the hanna checker. I knew some phosphates would leech from the dry rock but at six months later, I didn't think I would still be getting such a high reading.
Continuing the GFO is an obvious need but I am now seeking to see if there is any other method to reduce my phosphates to a more manageable level. GFO is expensive and the frequent changing is starting to break the bank. I have done some preliminary research on lanthanum chloride (Seaklear) and found that many had mixed results, with lots of people having success. I also found that some people are building lanthanum reactors to mitigate the risks associated with the lanthanum.
I am hoping that people can chime in with their experience using lanthanum, or any other method, to quickly lower phosphates. If possible, I would love to hear about any tips or issues that you encountered. If you personally built or use lanthanum (either by dosing directly or using a reactor), I would also love to hear any experience you have.
Continuing the GFO is an obvious need but I am now seeking to see if there is any other method to reduce my phosphates to a more manageable level. GFO is expensive and the frequent changing is starting to break the bank. I have done some preliminary research on lanthanum chloride (Seaklear) and found that many had mixed results, with lots of people having success. I also found that some people are building lanthanum reactors to mitigate the risks associated with the lanthanum.
I am hoping that people can chime in with their experience using lanthanum, or any other method, to quickly lower phosphates. If possible, I would love to hear about any tips or issues that you encountered. If you personally built or use lanthanum (either by dosing directly or using a reactor), I would also love to hear any experience you have.