Ready, set…water! 90gal peninsula build

DjPhato

New member
Hello all, I am so excited to start this new tank after years without an aquarium. This time I thought I will build my dream tank (unfortunately a bit smaller than what I wanted due to space constraints).

Tank: Glasscages 36x22xx23h - ultra clear on three sides with two 1in drain and one 3/4in return all included in a separated section of the tank on one short side.

Stand: custom made wall cabinet, wood, plaster and white pvc in the inside

Sump: Fiji Cube Fiji-24 Advanced Reef Sump 2nd Gen + ATO111 narrow water reservoir 10gal 4x20x20
A small section of the sump (after the skimmer and before the return section) will be a refugium illuminated by an AI Prime 16led fuge light (or a cheap led plant light, I did not decide yet)

Tech:
Return Sicce Syncra sdc 6.0 wifi
Heather Sicce scuba 300w contactless
ATO XP aqua duetto dual sensor system
Skimmer Bubble magus Curve elite 5 with sicce pump
Flow pumps, two AI nero 5 powerheads 3000gph

Main light will be a old Radion xr30w (generation 1) for the beginning and will be eventually substituted with Radion xr30 G6 blue or other

What do you think? I got lots of suggestions from this amazing community, thank you so much!!!

See pictures and more updates will follow :)
 
Last edited:
First pictures
 

Attachments

  • IMG_2944.jpeg
    IMG_2944.jpeg
    435.5 KB · Views: 1
  • IMG_2951.jpeg
    IMG_2951.jpeg
    470.1 KB · Views: 1
  • IMG_2964.jpeg
    IMG_2964.jpeg
    432.2 KB · Views: 1
  • IMG_2967.jpeg
    IMG_2967.jpeg
    288.5 KB · Views: 1
  • IMG_3003.jpeg
    IMG_3003.jpeg
    243.3 KB · Views: 1
  • IMG_3008.jpeg
    IMG_3008.jpeg
    268.6 KB · Views: 1
  • IMG_3010.jpeg
    IMG_3010.jpeg
    323.3 KB · Views: 1
  • IMG_3058.jpeg
    IMG_3058.jpeg
    310.8 KB · Views: 1
Back
Top