Reef Fanatic Probe Holder Bulkhead

[Tabeaubi]

I am currently using an MRC-1 Calcium reactor, I purchased a add on chamber to lower the PH effluent before it gets to the tank. Only problem I have is that I have to measure the efluent directly after the MRC-1 to get an accurate reading for my pH controller.
I found these at Premium Aquatics and was thinking I could add one to my reactor so I can get a pH reading from within the reactor and use the add on chamber. Anyone ever use one of these before.

http://www.premiumaquatics.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=RF-PROBEH&Category_Code=Bulkheads

Any thoughts would be appreciated.

Thanks in advance.

 

[ScubaTC]

Wondering if you got one and if it worked?

 

[mpdharley]

I cut the feed line from chamber 1 to chamber 2, then add a John Guest Speed T (click here ) fitting to re-connect the chambers. Then I added another small hose to the open end of the T and capped it with a Speed Fitting ball valve (click here).

Whenever I want to test the effluent, I open the ball valve into a small cup and I have enough test.

 

[Tabeaubi]

<a href=showthread.php?s=&postid=9604049#post9604049 target=_blank>Originally posted</a> by ScubaTC
Wondering if you got one and if it worked?

Instead I built a probe sump.


http://home.comcast.net/~jdieck1/drawings.html

 

[ARNETT]

I put a prob holder in the top of my reactor it works great .
I drilled the top and pipe glue the prob holder in then the let it cure
when puting the prob in the holder do it hand tight then with you will need to tightin it just a little more to make it water tight !
Dont over tight in its only a prob !
I never broke my prob yet but it can be done !
These are for made forrr something else but work !
Some say they dont but they work for me !