Removing zoos from frag disks

[FroMan]

This is definatly a zoos newb question

I'd like to remove some zoo frags I purchaced at a club meet this past month that are mounted on some frag disks.

Can I simply slide a razor blade between the disk and the base of the zoos?

I read the link about fragging in the thread at the top of the forum and I figured that it would be a simialr procedure, but I wanted to confirm.


Thanks in advance

FroMan

 

[xxtriggermanxx]

You could use a tile nipper to break away most of the disk . that way you have something to glue/epoxy down on the new location.

 

[dc_909]

Yeah I would definitely try to leave something behind that you can use to help mount to whatever you want.

 

[Python73]

Simple answer... yes. That will work. In fact, if they are glued to the plug, superglue tends to pop off the plug quite easily until the cloral grows completely over it and encrusts the plug.

Both posters above give good advice though, it is much easier to glue rock to rock than to reglue the zoas themselves to a new spot.

Good luck.

S !